What type of work are you seeking?
Current Job Openings
CALL CENTER REPRESENTATIVE
Tulsa | $15.00 | Order Id: 88242
Key Personnel is seeking Call Center Representatives for a company in the Tulsa area.
Location: East Tulsa
Pay Rate and Schedule for Call Center Representative:
$15/hr.
Monday - Friday (8:00 am to 5:00 pm)
Expectations for Call Center Representative:
Reach out to existing customers to offered additional products
Must have basic Excel skills
Previous Sales experience preferred
Key Personnel is an equal opportunity employer. A background check and drug test will be required.
PAINTER-AUTO BODY
TULSA | $22.00 | Order Id: 88430
Pay: $22.00 per hour.
Hours: 5am to 3:30pm, Monday through Thursday + overtime some Fridays.
Northeast Tulsa
Painter – Auto Body
Primary painter job duties:
Prepares paint area appropriately to result in good paint application that meets paint specification criteria:
Paint components using appropriate spray techniques.
Knowledgeable on how to adjust the spray equipment.
Able to prep the bus to mask the areas that they will paint.
Knowledgeable of proper spray techniques.
Able to mix paints and work with solvents.
Able to know what and identify paint defects.
Able to maintain their equipment.
Must know basic safety precautions when handling paints/solvents.
Must be able to perform task in full gear of painter's PPE.
Performs any other assigned task.
For the Painter role, prefer candidates with:
Experience with body repairs.
At least a year of automotive hands on experience, preferred.
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3 pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
#INDLI2
SHIPPING
TULSA | $0.00 | Order Id: 88409
Pay is $15 per hour. Hours are 7am to 3:30pm, Monday-Friday, with OT as needed.
North Tulsa
Shipping Clerk
Candidate for the shipping department; would like the right candidate to have 5 years of shipping experience, knowledge of forklift & UPS paperwork very helpful.
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
ASSEMBLY-LINE WORKER
TULSA | $18.35 | Order Id: 88407
Assembly
Hours for assembly: 4:45pm-1:15am Monday-Friday.
Pay for assembly: $17.75/hr.
With this assembly position you could be put in fabrication or finish.
In Fabrication you will handle parts as they process through fabrication.
In Finish you will transfer fabricated parts to various locations within the finish department.
In both the Fabrication and Finish department you continuously lift parts that weigh anywhere from 1lb to 18lbs.
You will stand for your 8 hour shift. In assembly you will put together all of the various components that make up a free standing gas or electric range.
This requires you to stoop, bend, twist, lift, manipulate small parts and use some small manual and power hand tools.
Must have manufacturing, assembly or general warehouse experience and able to pass a drug screen.
Safety Sensitive Role
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
#INDLI2
JANITORIAL
TULSA | $14.00 | Order Id: 88405
$14.00 per hour. Hours: 5am - 3:30pm Monday-Thursday
North Tulsa
Janitors Needed
Duties include: sweeping, mopping, sanitizing, and cleaning the facilities.
In order to make the best use of your time, only qualified applicants will be contacted.
We are an Equal Opportunity Employer.
GENERAL SHOP HELPER
TULSA | $16.00 | Order Id: 88402
Pay: $16 per hour
General Shop Helper
East Tulsa
Pay Rate and Hours: Monday through Friday, 7:30am- 4pm
Job Description:
Requires knowledge of numeric controls, sets and use of precision measuring devices. Operate multiple machines at one time. Assure that parts comply with the company's quality standards by in process inspection. Must be able to read tape measure. Grinding and dressing parts. Perform tool changes and machine setups.
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (Tech Ridge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
ASSEMBLY-MECHANICAL
TULSA | $17.50 | Order Id: 88399
Job Duties for assembly:
Performs a variety of assembly / disassembly and fastening/unfastening of parts larger than Production Assembler
Hand using tools; fit, bolt, cut or otherwise connect components and equipment according to specifications.
Prepare surfaces for paint application
Collaborates with peers to accomplish projects or tasks
Develops and maintains relationships with peers and customers
Participates in group discussions and meetings
Perform checks on product and process
Assure material integrity by routine inspection by following established procedures and quality processes and specifications
Assure piece and work output meets specifications
Sort and separate defective materials and parts
Assembles/disassemble and fasten / unfasten parts larger than hand using tools; fit, bolt, weld, cut or otherwise connect components and equipment according to specifications
Assemble / disassemble small parts not requiring precision alignment or small tolerances
Performs any other assigned task
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com. Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
#INDLI2
PREPAINT-ASSEMBLY
TULSA | $19.00 | Order Id: 88397
Pay Rate for the assembly role: $19.00
Heavy Assembly
Hours for the assembly role: 5am to 3:30pm Monday – Thursday (Occasional overtime on Fridays)
Location: North Tulsa
Job Description:
Performs a variety of assembly / disassembly and fastening/unfastening of parts larger than hand using tools; fit, bolt, cut or otherwise connect components and equipment according to specifications.
Prepare surfaces for paint application
Collaborates with peers to accomplish projects or tasks, participates in group discussions and meetings, perform checks on product and process
Assure material integrity by routine inspection by following established procedures and quality processes and specifications
Assure piece and work output meets specifications
Sort and separate defective materials and parts
Assembles/disassemble and fasten / unfasten parts larger than hand using tools; fit, bolt, weld, cut or otherwise connect components and equipment according to specifications
Assemble / disassemble small parts not requiring precision alignment or small tolerances
Ability to achieve high performance goals with changing work directions
Good mechanical aptitude
Performs any other assigned task
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety sensitive role
Key Personnel is an Equal Opportunity Employer
#INDLI2
ASSEMBLY
TULSA | $0.00 | Order Id: 86765
Pay: $19.00/HR+
Assembler
North Tulsa
Pay Rate and Hours:
• Pay: $19.00-$21.00/HR+ DOE
• Hours: Monday through Friday, 7:00am-3:30pm (overtime-6am to 4:30pm)
Job Description:
• Recondition pneumatic and hydraulic motors, electrical components, and heavy machinery.
• Assemble/recondition of industrial equipment under the instruction of a senior technician.
• Assemble equipment subcomponents, such as mechanisms, expansion sections, powered wheel assemblies, etc.
• From experience, resolve any assembly problems and report any other problems to lead for assistance.
• Think ahead and maintain a strong commitment to excellence and quality.
• Read, interpret, and follow engineering drawings and schematics.
• Work as a member of a team.
• Responsible for supporting all quality measures and procedures.
Job Requirements:
• High school diploma or equivalent.
• Prefer 1-2 years’ experience with industrial machinery schematics and assembly drawings or equivalent.
• Understanding of pneumatic and hydraulic systems.
• Thorough knowledge and use of shop hand tools, power tools, and measuring tools.
• Operation of overhead cranes and forklifts.
• Demonstrate mechanical ability in the assembly and recondition of industrial equipment.
• Basic welding a plus.
•
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
PRESS OPERATOR
Tulsa | $17.00 | Order Id: 88392
Pay: $17 HR
Hours: 6:30 AM- 2:30 PM
Days: Monday - Friday
Broken Arrow
Press Operator
Press Operator Experience and Requirements:
• Press the different types of plates according to standard operating procedures.
• Run, monitor and adjust the press line to achieve quality specifications to account for variables such as new tools, material, etc.
• Test and verify quality of parts before, during, and after the production according to the procedures.
• Manage inventory of both raw material and finished goods, packing and handling effectively and efficiently.
• Process the tool changes and cleaning.
• Research the breakdown causes and make the necessary repairs.
• Drive improvements in efficiency, quality, and safety
• Document and communicate issues to stakeholders
• Maintain the order and cleanliness of the work place and press lines.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
#INDLI2
PRESS OPERATOR
Tulsa | $17.00 | Order Id: 88392
Pay: $17 HR
Hours: 6:30 AM- 2:30 PM
Days: Monday - Friday
Broken Arrow
Press Operator
Press Operator Experience and Requirements:
• Press the different types of plates according to standard operating procedures.
• Run, monitor and adjust the press line to achieve quality specifications to account for variables such as new tools, material, etc.
• Test and verify quality of parts before, during, and after the production according to the procedures.
• Manage inventory of both raw material and finished goods, packing and handling effectively and efficiently.
• Process the tool changes and cleaning.
• Research the breakdown causes and make the necessary repairs.
• Drive improvements in efficiency, quality, and safety
• Document and communicate issues to stakeholders
• Maintain the order and cleanliness of the work place and press lines.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
#INDLI2
PRESS OPERATOR
Tulsa | $19.50 | Order Id: 88388
Pay: $19.50 HR
Hours: 11:30 PM – 8:00 AM
Days: Monday - Friday
Broken Arrow
Press Operator
Press Operator Experience and Requirements:
• Press the different types of plates according to standard operating procedures.
• Run, monitor and adjust the press line to achieve quality specifications to account for variables such as new tools, material, etc.
• Test and verify quality of parts before, during, and after the production according to the procedures.
• Manage inventory of both raw material and finished goods, packing and handling effectively and efficiently.
• Process the tool changes and cleaning.
• Research the breakdown causes and make the necessary repairs.
• Drive improvements in efficiency, quality, and safety
• Document and communicate issues to stakeholders
• Maintain the order and cleanliness of the work place and press lines.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
LEAD & GENERAL AUTO GLASS TECHNICIAN/MECHANIC
TULSA | $0.00 | Order Id: 88253
Pay: $17-$27 /HR Depending on Experience
Hours: Day 8 AM- 5 PM
Days: Monday - Friday
East Tulsa
Lead / General Auto Glass Technician/Mechanics
Lead/General Auto Glass Technician/Mechanics Experience and Requirements:
• Must have mechanical background and automotive work history
• 1+ Years of previous auto glass experience is required
• Technicians will receive on-the-job training from professionals within the industry and enjoy the industries latest tools and a great work environment
• Must have a valid driver’s license
• Must keep a clean cut physical appearance
• You will be working all makes and models of vehicles, installing the highest quality glass products with superior workmanship.
This is a SAFETY SENSITIVE Position
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
PRESS OPERATOR
Tulsa | $18.00 | Order Id: 88389
Pay: $18.00 HR
Hours: Weekend Friday, Saturday & Sunday 7 AM-7:30 PM
Days: Monday - Friday
Broken Arrow
Press Operator
Press Operator Experience and Requirements:
• Press the different types of plates according to standard operating procedures.
• Run, monitor and adjust the press line to achieve quality specifications to account for variables such as new tools, material, etc.
• Test and verify quality of parts before, during, and after the production according to the procedures.
• Manage inventory of both raw material and finished goods, packing and handling effectively and efficiently.
• Process the tool changes and cleaning.
• Research the breakdown causes and make the necessary repairs.
• Drive improvements in efficiency, quality, and safety
• Document and communicate issues to stakeholders
• Maintain the order and cleanliness of the work place and press lines.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
PRESS OPERATOR
Tulsa | $19.50 | Order Id: 88388
Pay: $19.50 HR
Hours: 11:30 PM – 8:00 AM
Days: Monday - Friday
Broken Arrow
Press Operator
Press Operator Experience and Requirements:
• Press the different types of plates according to standard operating procedures.
• Run, monitor and adjust the press line to achieve quality specifications to account for variables such as new tools, material, etc.
• Test and verify quality of parts before, during, and after the production according to the procedures.
• Manage inventory of both raw material and finished goods, packing and handling effectively and efficiently.
• Process the tool changes and cleaning.
• Research the breakdown causes and make the necessary repairs.
• Drive improvements in efficiency, quality, and safety
• Document and communicate issues to stakeholders
• Maintain the order and cleanliness of the work place and press lines.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
MEDICAL ASSISTANT
Tulsa | $0.00 | Order Id: 88379
Key Personnel is working with a Pain Management company in Tulsa, Ok seeking a Medical Assistant with X-Ray experience. Temp to hire opportunity!
Medical Assistant Schedule and Pay Rate:
• 8am- 5pm, Monday - Friday
• Pay Rate: $24-30 an hour DOE.
Medical Assistant Requirements:
• Must have certification.
Key is an Equal Opportunity Employer.
MATERIAL HANDLER
Catoosa | $0.00 | Order Id: 88365
Pay: $16 + Depending on Experience
Hours: 5 PM-1:30 PM With possible overtime
Days: Monday - Friday
Port of Catoosa
Material Handler- Temporary position
Material Handler Experience and Requirements:
Temporary – Project based up to 6 months
Must be able to use forklift with a variable reach book or telehandler
For the Material Handler position,
• Loads, unloads, and moves materials within or near plant, yard, or work site.
• Ability to read Bill of Material, written requisitions and/or follows oral instructions to ascertain materials needed in shop or prepared for shipment.
• Ability to operate the forklift. Convey materials from storage or work site to designed area. Secure lifting attachments to raw materials, mechanicals, etc. and conveys load to destination or signals crane, hoisting or forklift operators to move load to destination. Prior one (1) year experience with overhead crane and rigging experience is required
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
#INDLI2
WELDER
Tulsa | $0.00 | Order Id: 87856
Pay: $22.00/HR+
Welder
South Tulsa location
Pay Rate and Hours:
• Pay: $22.00/HR+ DOE
• Hours: Monday through Friday, 6:00am-2:30pm
Job Description:
• Welding oil field parts
• Adjust welder settings based on metallurgical properties of metal used in blueprint to ensure quality welds
• Work from blueprints, to set up and weld parts using appropriate fixtures
• Operate hand grinders as needed
• Visually inspect work and fixturing on an on-going basis to check quality standards and the appearance of the product
Job Requirements:
• One year of Tig, Mig and Fluxcore welding experience
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
ASSEMBLY-ELECTRICAL PANEL
TULSA | $13.25 | Order Id: 88356
Pay: $13.25 per hour. Hours: 5am to 3:30pm, Monday-Thursday
East Tulsa
Panel and Wiring Assembly
Immediate Openings! Wire "point-to-point" and connect wire harnesses using prints/drawings and wire schedules in a climate controlled, friendly environment. Will also assemble panels. Training provided. Must be able to lift 50lbs.
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at at 9717 E. 42nd Place (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3 pm, Monday through Friday.
Key is an Equal Opportunity Employer.
HYDRO/TUBE ROLLER
Sapulpa | $0.00 | Order Id: 88351
Pay: $16-$20/HR Depending on experience
Hours: Day 5:00 AM-3:30 PM
Days: Monday - Friday
Sapulpa
Tube Rolling/Hydro
Tube Rolling/Hydro Experience and Requirements:
• Must have experience using a tube expander (tube rolling) to install finned tubes into the heat exchanger coils that are built in the shop.
• Must have good experience and will require little training to jump in and start working immediately.
• Must be flexible about their position as all of our people in the final assembly area perform several different tasks during the day from loading the tubes into the unit, preparing the plugs for installation into the headers, or installing the plumbing needed to conduct the hydrostatic pressure testing.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
PAINTER-INDUSTRIAL
Sapulpa | $0.00 | Order Id: 88349
Pay: $16+ Depending on experience
Hours: Day 5:00 AM-3:30 PM
Days: Monday - Friday
Sapulpa
Industrial Painter
Industrial Painter Experience and Requirements:
Candidates must have industrial painting and coating experience.
Must be familiar with mixing and loading the paint.
Basic knowledge with paint booth controls.
Experience with pressure pot-style setup.
Basic safety measures.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
WELDER-STRUCTURAL
Sapulpa | $0.00 | Order Id: 88347
Pay: $16+ Depending on experience
Hours: Day 5:00 AM-3:30 PM
Days: Monday - Friday
Sapulpa
Structural Welder
Structural Welder Experience and Requirements:
Candidates must have experience in welding structure assemblies including ladders, platforms, and other misc. pieces. Structural fitting experience would be a bonus in this case, but this is not ASME welding and is not a position for someone who only wants to be a fitter as other duties will be required.
Structural welding most of the time.
Candidate must pass a weld test.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
COOK ROOM
OWASSO | $14.50 | Order Id: 88341
Pay $14.50hr Hours are 4:00pm- 1:00am Monday - Friday
Owasso
Cook Room
WORK ENVIRONMENT:
The office environment is typically climate controlled of 68ºF to 72ºF and clean, with normal air contaminants, such as dust, typically found in an office environment
The indoor production environment is climate-controlled of 40ºF to 45ºF with regular exposure to prolonged noise
While in the production area, all employees are required to wear Personal Protective Equipment (PPE) to include hair and beard nets, rubber soled shoes, smocks, hearing protection and hard hats
QUALIFICATIONS:
Ability to maintain concentration while performing tasks over period of
Ability to coordinate actions in relation to others’ actions.
Ability to communicate effectively in writing and orally with others.
Ability to follow instructions given by Supervisor
Regular attendance at work and punctuality are essential job functions.
Ability to work in a safe manner, be considerate of other employees’ safety, and wears all personal protective equipment (PPE) as required.
PHYSICAL DEMANDS:
Must be able to use both hands to grasp and pull bags
Must be able to lift a roll of film weighing ~65-70 lbs unassisted from floor level to waist high and carry it approximately 50 feet to bagger machine
Must have visual acuity to distinguish lettering and numbering on bags on moving conveyor
Walks/stands on concrete floor which at times may be slippery
Must be able to work 2.5 to 3 hours at a time before getting a 30-minute break
May be exposed to strong odors from marinates
Must wear approved PPE, such as but not limited to, slip resistant footwear and hearing protection
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
GENERAL WAREHOUSE WORKER
OWASSO | $15.00 | Order Id: 88340
Pay is $13.50/hr and $1.50/hr shift pay = $15.00. Hours: 4:00pm - 1:00am, Monday-Friday and with mandatory overtime on Saturdays depending on our production run.
North Tulsa
Warehouse Associate
Most of the time will be spent stacking boxes in the stack off room. Computer skills are required. Other duties include: data entry, receive, unload, check, verify and place incoming inventory items.
Temp must also be:
• Able to lift 80lbs
• Must be able to work on mandatory overtime
• Must be able to work in a very freezing environment
• Forklift a plus
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
ENGINEER-MECHANICAL
TULSA | $0.00 | Order Id: 88336
Key Personnel is seeking Manufacturing Engineers for multiple openings with an established Tulsa company.
6-12 month contract assignments with Pay in the $36-38/hr range depending on experience. *Safety Sensitive Role
Ideal candidates have 3-5 years of experience with product manufacturing.
Candidates should be comfortable working on shop floor and interacting with all levels of employees.
Plans, designs, and implements manufacturing processes, ensures new product designs can be manufactured, and maintains the assembly processes in production.
Requirements:
· 3 - 5 years of proven work experience in manufacturing engineering
· Working knowledge of process engineering software packages
· Analytical thinker with interpersonal skills
· Safety Minded
· AutoCAD and 3D Drafting experience
· BS degree in Engineering
Pay:
· Pay: $30-36/hr DOE
· Paid Weekly!
· Direct Deposit and/or Paycards Available
Placing Key People in Key Jobs, Apply today!
Key Personnel is an Equal Opportunity. A drug screen and background will be required.
MAINTENANCE TECHNICIAN CLASS B
CATOOSA | $0.00 | Order Id: 88092
Pay: $24-$26/HR
Hours: Night 5 PM-2:30 AM
Days: Monday - Friday
Catoosa
Maintenance Technician Class B
Maintenance Technician Class B Experience and Requirements:
Perform activities concerned with maintenance of equipment and machinery in industrial plant by performing the following duties. Repairs and maintain machinery and mechanical equipment such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment. Performs monthly inspections on all production equipment and replacement parts. Confers with department managers to coordinate monthly inspections. Must have a valid driver’s license to be able to drive to different locations within the Port. Observes and inspects mechanical devices in operation may consist of listening to equipment in operation to determine mechanical needing adjusted or replaced some disassembly is required to access certain devises needing to be observed mechanical skills are required in repairing mechanical equipment. High school diploma or general education degree (GED) preferred; 5-6 years related experience and/or training; or equivalent combination of education and experience.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
PRODUCTION WORKER
OWASSO | $13.50 | Order Id: 88316
Pay is $13.50 per hour. Hours: 6:30am to 3pm(Monday-Friday) (8 hours) with possible overtime during the week and on weekends.
Owasso
Chicken Line - The work environment freezing, they will be exposed to raw meat.
JOB DESCRIPTION
WORK ENVIRONMENT:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.
Indoor manufacturing environment with exposure to noise from equipment.
Employees work in a climate-controlled environment of 35F to 45F degrees.
Assigned under the general supervision of the Production Supervisor to utilize a
variety processes, equipment, or tools to meet production standards or
specifications. May be titled Utility, QC, Supply Room Attendant /Janitorial, Box Room, Machine Operator, Knife Sharpener, Cutters, Portion Cutters, Packers, Philly, Needle Room, Handlers, Marination Tumbler, Chicken Handler.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Must follow Good Manufacturing Practices (GMP’s)
• Must be able to firmly grip all tools used with dominant hand, using proper technique to complete the required tasks
• Visually inspect products or completed tasks
• Must be able to ensure products are within specification
• Required to wear all safety and personal protective equipment (PPE) such as mesh gloves, wrist protectors, ear muffs, hair and beard nets, and rubber soled shoes
• May be required to “fill-in” for other positions when there is a need.
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions.
• Ability to maintain concentration while performing tasks over period of time
• Ability to coordinate actions in relation to others’ actions
• Documented good safety and attendance record
• Demonstrated commitment to the GMP’s
• Must be able to communicate effectively with supervisors and co-workers
• Regular attendance at work and punctuality are essential job functions
• Ability to deal with stress and get along with co-workers and supervisors
• Ability to work in a safe manner, be considerate of other employees’ safety, and wears all personal protective equipment (PPE) as required
PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.
• Requires a full range of body motion to include lifting, twisting, bending, reaching outward, pushing, and pulling
• May be required to lift up to 50 lbs.
• The ability to maintain one’s balance while performing the required work tasks is essential
• Works at waist high counter with arms extended below shoulder level
• Walks/stands on even concrete surface, which may at times be slippery due to marinates, water, and other liquids associated with the production process
• Requires corrected vision and hearing to normal range
• The job is fast paced and the ability to deal with stress is essential
• May be exposed to strong odors such as marinate from seasoned meat
Full time regular position that works Monday through Friday, generally 8 hours per day, with minimal overtime. Travel is not required for this position.
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
PAINTER-BLASTER
CATOOSA | $17.00 | Order Id: 88310
Pay: $17.00/HR
Header Blaster/Painter
Catoosa location
Pay Rate and Hours:
• Pay: $17/HR
• Hours: Monday through Friday, 6:00am-2:30pm with overtime as needed
Job Description:
• Abrades surfaces of metal or hard composition objects to remove adhering scale, sand, paint, grease, tar, rust, dirt and to impart specified finish.
• Shovel or pours abrasives such as sand, grit, or shot of specified grade into machine hopper.
• Select premixed paints, or mixes required portions of pigment, oil, and thinning and drying substances to prepare paint that matches specified colors.
• Ability to prep product prior/ post painting.
• Must be able to us a power spray guy.
Job Requirements:
• Must pass Pulmonary Function Test(PFT) and a respirator fit test: half and full face
• Must be able to lift to 50lbs.
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
HEADER GRINDER
CATOOSA | $17.00 | Order Id: 88312
Pay: $17.00/HR
Header Grinder
Catoosa location
Pay Rate and Hours:
• Pay: $17/HR
• Hours: Monday through Friday, 5:00pm-1:30am with overtime as needed
Job Description:
• Grind and smooth surfaces of Headers or Header components.
• Position work pieces by using overhead or jib cranes.
• Examine surface of work piece for defects
• Replace worn abrasive disks, wheels, and die grinder bits according to specifications.
• Pull trigger to start power tool, move it over surface of work piece to remove scratches, laminated metal, excess weld material, and burrs.
• May chip or grind out pits or cracks.
• Remove machining chips from inside of header.
• Maintains production record of parts and jobs fabricated as required by the Department Manager.
• Operate industrial forklift.
Job Requirements:
• Prior experience preferred, but not required.
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
PRODUCTION SUPERVISOR
OWASSO | $18.50 | Order Id: 88315
Pay: $17.00/hour plus $1.50/hour shift premium
Production Training Lead – 2nd Shift
Owasso Location
Pay Rate and Hours:
• Pay: $17.00/hour plus $1.50/hour shift premium
• Hours: Monday through Friday, 3:00pm to 12:00am
Job Description:
• Be the liaison for new probationary employees for the onboarding process.
• Train new probationary employees where appropriate and/or work with supervisors to assign training of probationary employees.
• Perform evaluation of new probationary employees to ensure they understand their tasks, that they are proficient and understand the importance before they are released to perform said tasks.
• Assess training needs through Alchemy, surveys, interviews with employees, focus groups, or consultation with supervisors.
Job Requirements:
• Ability to effectively read, write and communicate in English.
• 1-2 years of training experience related in manufacturing, or combination of education and related experience in HR
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
ASSEMBLY
TULSA | $20.00 | Order Id: 88314
Pay: $20/hr
Hours: Day 5 AM – 3:30 PM
Weekend: Monday-Thursday
Tulsa
EV GT Assembly
Experience and Requirements
Performs a variety of assembly / disassembly and fastening/unfastening of parts larger than hand using tools; fit, bolt, cut or otherwise connect components and equipment according to specifications. Prepare surfaces for paint application.
• Collaborates with peers to accomplish projects or tasks
• Develops and maintains relationships with peers and supervisors
• Participates in group discussions and meetings
• Perform checks on product and process
• Assure process integrity by routine inspection by following established procedures and quality processes and specifications
• Assure work output meets specifications
• Sort and separate defective materials and parts
• Assembles/disassemble and fasten / unfasten parts larger than hand using tools; fit, bolt, or otherwise connect components and equipment according to specifications
• Assemble / disassemble small parts not requiring precision alignment or small tolerances
• Assemble / disassemble small parts requiring precision alignment and small tolerances
• Ability to read and follow work procedures
• Ability to work in areas that are hard to reach and in awkward positions
• Ability to stand, crouch, climb 10 hours per day (in addition to overtime) in a non-climate-controlled manufacturing environment with intermittent noise, fumes, solvents and paints
• Ability to lift up to 35 pounds on a regular basis and work around moving vehicles, on ladders and scaffolding, below ground level, with vibratory tools
• Performs any other assigned task
Education / Certifications
• At least 3 months of mechanical hand tools or power tools work experience
Background Check and Drug Screen required.
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd St (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
#INDLI2
PAINTER-BLASTER
CATOOSA | $0.00 | Order Id: 88311
Pay: $17.00/HR+
Header Blaster/Painter
Catoosa location
Pay Rate and Hours:
• Pay: $17/HR+ Depending on Experience
• Hours: Monday through Friday, 5:00pm-1:30am with overtime as needed
Job Description:
• Abrades surfaces of metal or hard composition objects to remove adhering scale, sand, paint, grease, tar, rust, dirt and to impart specified finish.
• Shovel or pours abrasives such as sand, grit, or shot of specified grade into machine hopper.
• Select premixed paints, or mixes required portions of pigment, oil, and thinning and drying substances to prepare paint that matches specified colors.
• Ability to prep product prior/ post painting.
• Must be able to us a power spray guy.
Job Requirements:
• Must pass Pulmonary Function Test(PFT) and a respirator fit test: half and full face
• Must be able to lift to 50lbs.
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
CDL/TRUCK DRIVER/MATERIAL HANDLER
CATOOSA | $0.00 | Order Id: 87744
Pay: $19 + Depending on Experience
Hours: 6 AM-4:30 PM
Catoosa
CDL/TRUCK DRIVER/MATERIAL HANDLER
THIS IS A DIRECT HIRE POSITION
Job Description:
Drive semi with trailer some with items weighing up to 50 tons and 20’ wide. Over-width and overweight. Supply trailers to the areas that require them as needed, i.e.: structure, header bay for transporting heads to stress, heat treat, assembly for load out of completed units. Ability to load and unload materials that are to be transported to and from vendors. Help unload and sort, mark, and organize galvanized loads after they are checked if help is needed. Transport loads to and from vendors inside the port and around the Tulsa metro area as needed. Any other transportation needs for all the plants as directed by supervision or lead persons. Help with any material handling that may be needed anywhere in the shop as time allows. Must meet all requirements of the Fleet Policy. Computer skills is preferred to cross-train in all areas of the shipping and warehouse departments. Perform daily inspections on the company trucks and report any need for repairs to the Supervisor and maintenance. Document and maintain equipment and yard inventory of coolers and bundles. Must have a valid Oklahoma driver’s license, must be a qualified competent driver, meet requirements of the Department of Transportation, Thermal Solutions Fleet Policy, and shall maintain an acceptable driving record.
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd Place (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
HEADER WELDER LEAD
CATOOSA | $0.00 | Order Id: 86739
Pay: $28-$30 (depending on experience)
Hours are 5pm to 1:30am, Monday - Friday.
Catoosa
Header Welding Lead
Experience and Requirements
Ability to identify and assist in coordinating and accomplishing day to day operation of workflow. Work directly with Department Manager to ensure production and quality needs are achieved. Able to document data and write clear reports (production, rework, quality, line stop etc.) Examines items produced to determine if items meet specifications. Interprets specifications, blueprints, and job orders to employees and assigns duties. Establish or adjust work procedures (QWI – Quality Work Instruction) to standardize good work practices and to ensure quality of work. Responsible for conducting safety bi-weekly meetings. Reinforce safety policy and rules including identify potential hazards in the work area. Minimum 3 years experience in a manufacturing environment required.
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd St (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
FIELD SERVICE REPRESENTATIVE
CATOOSA | $0.00 | Order Id: 86745
Pay Range: $23-$27 Depending on Experience
Hours: 6am-2:30pm
Days: Monday - Friday
Port of Catoosa
Field Service Representative
Job Duties:
Plan and coordinate activities concerned with installing equipment (Cooling Towers, Air Cooled Heat Exchangers), investigating and resolving customer reports of technical problems with equipment, and eliminating future operational or service difficulties by performing the following duties. Responsible for on-site field visits to supervise the installation of equipment. Investigate and resolve customer reports of technical problems with equipment and perform routine repairs.
Responsible to insure all new or modified installations of equipment has been completed to ensure full functionality according to applicable industry standards, company standards and customer specifications. Review performance reports and documentation from customers and inspects malfunctioning or damaged equipment to determine nature and scope of problem. Analyzes inspection reports to determine source of problem and make recommendations for repair, replacement, or other corrective action. Coordinates problem resolutions with Field Service Manager, engineering, and other inter-company departments to expedite repairs. Maintains records of reports. Responsible for submitting reports to the Field Service Manager and the Quality Control Manager. Provides recommendations to inter-company departments on recurring equipment problems noted in the field to instigate corrective action in design, production, service to eliminate future problems. Assist the Field Service Manager in providing day to day customer service to customer inquiries regarding equipment. Associate’s degree (A.A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. HVAC Technician Certification, Basic Electrical Technician Certification, or Rigging Certification are a plus.
Requirements:
Associate’s degree (A.A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience.
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd St (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
FINTUBE OPERATOR
CATOOSA | $0.00 | Order Id: 87941
Pay: $19+ Depending on experience
Hours: Day 6:00 AM- 2:30 PM
Days: Monday - Friday
Catoosa
Fintube Operator
Fintube Operator Experience and Requirements:
Must have 10-15 Years of Experience. Ability to set-up and operate finning machines to wrap on or embedded fin strip material on tubes to construct fintubes by reading blueprints, planning sheets, sketches, and related technical data to determine tooling requirements, setup procedures, control settings, and finning methods and sequences. Mount pans then, aligns, and secures pan in machine.
Ability to calculate and sets machine controls in relationship to work piece and regulate factors such speed, feed, and coolant flow; start machine and observe and listens to machine operation to detect malfunctions. Ability to feed tubes into the machine and connect other tubes with tube connectors to continue the finning process; adjusts machine feed and speed to fin tubes according to specifications. Verify dimensions of finned tubes for conformance to specifications using gauges, calipers, and ruler. Stop machine to change setup according to required machining sequence or to measure parts for conformance to blueprint specifications; perform oil level checks and clean machine, tooling, and parts. Perform some machine maintenance. Mount finning strips rolls into fin strip machine using overhead crane.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
ASSEMBLY CLASS A
CATOOSA | $0.00 | Order Id: 87934
Pay: $19 + Depending on Experience
Hours: Day 6:00 AM – 2:30 PM & Night 5:00 PM -1:30 Shifts Available
Days: Monday - Friday
Catoosa
Assembler Class A
Assembler Class A Experience and Requirements:
• Read blueprints and build bundles/sections by following prints.
• Calculate expansion measurements.
• Read expansion measurements.
• Set up and Adjust Expansion machine/gun settings.
• Tube Expansion.
• All plug and cover duties including choosing suitable thread lubricant.
• Soap Bubble Testing, Hydro Static Testing, and preparation for Helium Testing.
• Over Head Crane and Forklift operation.
• The ability to detect Safe and Unsafe Acts and the willingness to stop an unsafe act.
• Communication skills to teach others and to lead others in all Bundle/Section Assembly Task in the Air Cooled Heat Exchanger world.
• If no Air-Cooled Heat Exchanger experience, Shell and Tube Industry Experience may be adequate.
• Work on your feet six days per week while lifting, pushing, pulling, bending with as much as 50 lbs of weight.
• Rigging knowledge for Overhead cranes and lifting in general.
• Wear eye, ear, and steel toe foot protection at all times.
• Use Cell phones only on break times during work shifts.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
FINTUBE BANDER
CATOOSA | $17.00 | Order Id: 88309
Pay: $17.00/HR
Fintube Bander
Catoosa location
Pay Rate and Hours:
• Pay: $17/HR
• Hours: Monday through Friday, 6:00am-2:30pm with overtime as needed
Job Description:
• Ability to load tubes into input racks using overhead crane or by hand.
• Ability to operate cutoff saw to cut tubes to specified length
• Ability to move fintubes by hand into band molds, pushes buttons to close molds.
• Ability to dip ladle into pots of melted zinc metal and walks to each mold and pours from ladle into band molds to produce bands on the fintubes.
• After cooling pushes buttons to open molds and knocks off pouring basin with hammer.
• Ability to lift fintubes from output rack into shipping racks or crates.
• Break zinc ingots into smaller pieces, and places the pieces into the zinc pots keeping the zinc pots full of molten metal.
• Skim slag off molten metal, using strainer device
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
WELDER-HEADER
CATOOSA | $0.00 | Order Id: 86740
Pay: $22-25/hour depending on experience
Hours: 5 pm - 1:30 am
Days: Monday-Friday with possible overtime.
Catoosa
HEADER WELDER-COMBINATION A
Welders must be proficient in blueprint reading for layout. Must be able to correctly fit and weld fabricated and forged components to assemble Header components with Shielded Metal Arc Welding, Gas Metal Arc Welding, and/or Gas Tungsten Arc Welding Process. Position, align, and fit components together and tack-weld parts to secure in position for welding using correct welding process and procedure. Ability to set-up welding equipment for use of certain types of material. 3-5 years code welding experience required. Test requirements: pass a 2G plate test with the GTAW root pass and SMAW fill and cap.
Willing to train! Must have TIG/STICK Experience to be considered.
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd St(TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
HEADER WELDER/FITTER
CATOOSA | $0.00 | Order Id: 87254
Pay: $22+ depending on experience
Hours: 5 pm - 1:30 am
Days: Monday-Friday with possible overtime.
Catoosa
HEADER WELDER/FITTER
Proficient in blueprint reading for layout. Must be able to correctly fit and weld fabricated and forged components to assemble Header components with Shielded Metal Arc Welding, Gas Metal Arc Welding, and/or Gas Tungsten Arc Welding Process as required. Position, align, and fit components together and tack-weld parts to secure in position for welding using correct welding process and procedure. Set up welding equipment for the type of material being used. Hammer wedges and drift pins. Grind rough edges, surplus weld, or scale, using portable grinder. Position and turn clamps, and bolts using hand or wrenches. Position work pieces manually or by using overhead or jib cranes. Straighten warped or bent parts with a straightening press. Proficient with a cutting torch and/or plasma cutter.
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd St(TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
WELDER-FITTER
CATOOSA | $0.00 | Order Id: 88307
Pay: $22+ Depending on Experience
Hours: Night 5:00 PM -1:30 AM
Days: Monday - Friday
Catoosa
Structure Fitter Welder
Structure Fitter Welder Experience and Requirements:
Ability to lay out, fit, and weld fabricated components to assemble structural forms. Proficient in blueprint reading for layout
Selects equipment and plans layout, assembly, and welding; a layout, positions, aligns, and fits components together; positions work pieces manually or by using overhead or jib cranes Set up welding machine and welding gun: assemble/disassemble welding tips and its liner, wire feed and voltage, using arc or gas-shielded arc welding equipment. Repairs products by dismantling, straightening, reshaping, and reassembling parts. Operate cutting torch and plasma torch. Operate small saw machine and iron machine for cutting and coping, notching materials. Must pass 2g and 3g weld test. One year structural fitting experience recommended.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
WELDER-SUB-ARC
CATOOSA | $0.00 | Order Id: 87165
Pay: $19 + Depending on experience
Hours: 5 pm- 1:30 am
Days are Monday-Friday
Catoosa
HEADER SUB ARC/LANCE OPERATORS
Experience and Requirements
Ability to weld trunnion to end of headers and positions header using an overhead or jib crane; turn cranks or pushes buttons to align electrode on welding head over the weld joint. Ability to load reel of electrode wire onto machine and threads electrode wire from reel through feed rolls and welding head; turn welding head to set the specified angle of electrode. Fill hopper with specified flux and direct nozzle or gravity feed over weld line. Turn knobs to set current, voltage, and slope, and synchronize feed of wire and flux with speed of welding action. Ability to observe meters and gauges or observes welding action for compliance with procedures. Visually examine welds for adherence to specifications; grind welded surfaces as needed. Adjust machine setup to vary size, location, and penetration of bead; layout, fit, and tack work pieces together. Preheat work piece with hand torch or heating furnace; remove surplus slag, flux, and spatter. Ability to remove metal with carbon arc gouger to make repairs if necessary. Must be able to pass a 1g Saw Plate Sub-Arc and 2g Plate Test. 3 years experience required.
Background Check and Drug Screen required
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd St (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
WELDER-STRUCTURAL
CATOOSA | $0.00 | Order Id: 86625
Pay: $22 -$25/HR Depending on experience
Hours: 6 AM - 2: 30 PM & 5 PM-1:30 PM
Days: Monday-Friday
Northeast Tulsa
STRUCTURE WELDERS
Ability to weld fabricated parts of structural metal products in shop, plan sequence of operation and meet quality standards. Obtain specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun; connect cables from welding unit to obtain amperage, voltage, slope, and pulse, as specified by Welding Engineer or Welding Technician and be able to set welding machine wire feed and read blueprints. Must pass 2g and 3g weld test. 2 years of experience required.
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd St (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
PAINTER-POWDER COAT
CATOOSA | $0.00 | Order Id: 88305
Pay: $17 HR Plus Depending on Experience
Hours: 6 AM-2:30 PM W/ Possible overtime
Days: Monday - Friday
Catoosa
Powder Coating Painter
Powder Coating Painter Experience and Requirements:
Abrades surfaces of metal or hard composition objects to remove adhering scale, sand, paint, grease, tar, rust, and dirt, and to impart specified finish. Shovel or pours abrasives such as sand, grit, or shot of specified grade into machine hopper. Read work orders or receive instructions from supervisor regarding painting. Select premixed paints, or mixes required portions of pigment, oil, and thinning and drying substances to prepare paint that matches specified colors. Ability to prep product prior/ post painting. Must be able to use a power spray gun. Must pass Pulmonary Function Test (PFT); must be fitted and be able to wear respirator. Physically active & must be able to lift to 50 lbs.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
PAINTER-POWDER COAT
CATOOSA | $0.00 | Order Id: 88159
Pay: $18-$19 HR Depending on Experience
Hours: 5 PM-1:30 AM W/ Possible overtime
Days: Monday - Friday
Catoosa
Powder Coating Painter
Powder Coating Painter Experience and Requirements:
Abrades surfaces of metal or hard composition objects to remove adhering scale, sand, paint, grease, tar, rust, and dirt, and to impart specified finish. Shovel or pours abrasives such as sand, grit, or shot of specified grade into machine hopper. Read work orders or receive instructions from supervisor regarding painting. Select premixed paints, or mixes required portions of pigment, oil, and thinning and drying substances to prepare paint that matches specified colors. Ability to prep product prior/ post painting. Must be able to use a power spray gun. Must pass Pulmonary Function Test (PFT); must be fitted and be able to wear respirator. Physically active & must be able to lift to 50 lbs.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
MACHINE OPERATOR
Catoosa | $13.00 | Order Id: 88282
Pay: $13.00/hr
Machine Operator – Polishing machine/Load and Unload
Catoosa
Pay Rate and Hours:
• Pay: $13.00/hr
• Hours: Monday through Friday, 6:00am-6:00pm
Job Description:
• Load and unloading the correct glass on the polishing machine
Job Requirements:
• Must be able to lift up to 50 pounds repetitively
• Must be able to stand for majority of shift, and read a tape measure.
• Must be able to speak, read, and write English. Bi-Lingual a plus.
• Machine Operating experience a plus.
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer
Safety sensitive
LOCAL DRIVER
Tulsa | $0.00 | Order Id: 88281
Pay: $15.50-$16.00/HR
Hours: Day 8 AM-4:30 PM
Days: Monday - Friday
Tulsa
Local Driver
Local Driver Experience and Requirements:
Tulsa company seeking for a Local Driver responsible for driving a company vehicle, picking up and loading materials on a flatbed truck. Must have a valid drivers license and clean driving record.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
ORDER ENTRY SPECIALIST
TULSA | $18.00 | Order Id: 88261
Key Personnel is seeking a Order Entry Specialist to work for a company in the Tulsa area.
Looking for an individual with a good attitude that has the ability to accurately create production floor travelers and work instructions. Attention to detail is a must. This position requires computer skills, data entry, blueprint and bill of material reading. Must be able to understand and communicate to customer requirements and specifications.
Temp to hire opportunity!
Order Entry Specialist Hours:
Monday - Friday 7:00 am to 3:30 pm
Order Entry Specialist Duties:
Organize and prepare data using blueprints and Bill of Material.
Input this data into Job Boss software
Create production floor travelers and instructions.
Customer Service and communication skills
Detail/accuracy oriented
Familiar with Microsoft Office tools
Manufacturing background a plus
Order Entry Specialist Job Qualifications:
High School Diploma or equivalent
2 years of order entry experience preferred
Experience with high volume data entry
Proficient in MS Office
$18-20/hr. DOE
Key Personnel is an equal opportunity employer. A background check and drug test may be required.
#INDAP1
ASSEMBLY
TULSA | $0.00 | Order Id: 88259
Pay: $13.00/HR+
Assembly/General Labor
West Tulsa location
Pay Rate and Hours:
• Pay: $13.00-$15.00/HR+ DOE
• Hours: Monday through Friday, 6:00am-2:30pm
Job Description:
• Experienced Forklift Operator
• Finishing and Fabrication experience preferred
• Craine/Hoist experience preferred
• Some knowledge and skills pertaining to assembly of finished goods, inventory, counting and packaging
• Attention to detail and paperwork completion
Job Requirements:
• Finishing and Fabrication experience is a plus.
• Hand tool and power tool experience is a Must
• Possess basic mathematic skills and ability to read a tape measure
• Ability to bend, lift, and crouch
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
BLASTER OPERATOR
TULSA | $0.00 | Order Id: 88255
Pay: $18.00/HR+
Blast Operator
West Tulsa location
Pay Rate and Hours:
• Pay: $18.00/HR+ DOE
• Hours: Monday through Friday, 6:00am-2:30pm
Job Description:
• Experience with blasting operations and equipment
• Experience with basic hand tools
• Possess basic mathematic skills
• Ability to safely operate forklift under supervision
Job Requirements:
• Ability to safely operate forklift under supervision
• Ability to lift, crouch, and bend
• Must be able to read a tape measure
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
CNC OPERATOR
TULSA | $0.00 | Order Id: 88258
Pay: $15.00/HR+
CNC Machine Operator
West Tulsa location
Pay Rate and Hours:
• Pay: $15.00-$19.00/HR+ DOE
• Hours: Monday through Friday, 6:00am-2:30pm
Job Description:
• Read and interpret customer drawings, blueprints and engineering notes
• Operate and interpret readings from precision measurement equipment
• Basic knowledge to identify material type, size and thickness
• Knowledge to identify tooling for specific job requirements and make necessary setup changes
Job Requirements:
• Ability to safely operate forklift under supervision
• Two years minimum experience operating CNC machines
• Possess intermediate entry level mathematic skills
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
WELDER-MIG
TULSA | $0.00 | Order Id: 88256
Pay: $17.00/HR+
Mig Welder
West Tulsa location
Pay Rate and Hours:
• Pay: $17.00/HR+ DOE
• Hours: Monday through Friday, 6:00am-2:30pm
Job Description:
• Experience with hard wire MIG welding/Spray Arc
• Operate and interpret reading from basic measurement equipment
• Ability to interpret Blue Prints
• Familiarity with applicable welding processes
• Fitter welder experience is a plus
Job Requirements:
• Ability to safely operate forklift under supervision
• Ability to lift, crouch, and bend
• Possess basic mathematic skills
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
87921
LEAD & GENERAL AUTO GLASS TECHNICIAN/MECHANIC
TULSA | $0.00 | Order Id: 88253
Pay: $17-$27 /HR Depending on Experience
Hours: Day 8 AM- 5 PM
Days: Monday - Friday
East Tulsa
Lead / General Auto Glass Technician/Mechanics
Lead/General Auto Glass Technician/Mechanics Experience and Requirements:
• Must have mechanical background and automotive work history
• 1+ Years of previous auto glass experience is required
• Technicians will receive on-the-job training from professionals within the industry and enjoy the industries latest tools and a great work environment
• Must have a valid driver’s license
• Must keep a clean cut physical appearance
• You will be working all makes and models of vehicles, installing the highest quality glass products with superior workmanship.
This is a SAFETY SENSITIVE Position
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
CALL CENTER REPRESENTATIVE
Tulsa | $15.00 | Order Id: 88242
Key Personnel is seeking Call Center Representatives for a company in the Tulsa area.
Location: East Tulsa
Pay Rate and Schedule for Call Center Representative:
$15/hr.
Monday - Friday (8:00 am to 5:00 pm)
Expectations for Call Center Representative:
Reach out to existing customers to offered additional products
Must have basic Excel skills
Previous Sales experience preferred
Key Personnel is an equal opportunity employer. A background check and drug test will be required.
WORKERS COMPENSATION ADJUSTER
Tulsa | $40,000.00 | Order Id: 88241
OPHTHALMIC TECHNICIAN
Tulsa | $16.00 | Order Id: 88235
Key Personnel is hiring multiple Ophthalmic Technicians for a large eye care clinic in Tulsa, Oklahoma!
Schedule for Ophthalmic Technician:
Monday through Friday, 8am to 5pm
Pay: DOE $15-$17/hr
Responsibilities for Ophthalmic Technician:
Asking patients about their symptoms and recording the information for the doctor
Performing preliminary optical exams and tests
Cleaning and maintaining ophthalmic equipment
Supporting the ophthalmologist during eye surgeries and procedures
Administering eye care medications and topical treatments
Examining test results and contributing to diagnostic discussions
Answering patients' ophthalmology questions and encouraging healthy habits
Writing, editing and filing patient eye care medical records
Key is an Equal Opportunity Employer.
ASSEMBLY-MECHANICAL
Jenks | $15.00 | Order Id: 87267
Pay is $15 per hour. Hours are 6am to 2:30pm, Monday through Friday with possible overtime
South Tulsa
Mechanical Assembler
1. Successful working experience with geared mechanisms, hydraulic systems, electrical systems, pneumatic systems, welding techniques, painting techniques with air and pump supplied equipment
2. Assemble units per drawing specifications
3. Fastens parts together with bolts, screws, speed clips, rivets, or other fasteners
4. Removes small quantities of metal with hand files and grinders to produce close fit between parts
5. Operates hydraulic and manual presses to assist in assembly operation
6. Assists with performing test procedures on assemblies as directed
7. Learns to repair and maintain mechanical equipment
8. Assists in painting and parts / assembly cleaning when necessary or required
9. Perform material handling and / or track parts to receive into assembly
10. Be able to drive forklift truck, hand trucks or manually move parts as directed or required
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
MATERIAL HANDLER
Catoosa | $14.00 | Order Id: 88117
Pay: $14.00/HR
Material Handler -Furnace load/unload
Catoosa
Pay Rate and Hours:
• Pay: $14.00/HR
• Hours: Monday through Friday, 6:00pm-6:00am
***The positions below are NIGHT SHIFT POSITIONS. The training for these positions will take place on day shift for 30-45 days and then the candidate will switch over to night shift after their training is completed.***
Job Description:
• Efficiently load glass from racks/carts onto furnace or unload glass from furnace onto racks/carts
• Transport glass from one location to another by carrying or using appropriate machinery
• Use a tape measure to ensure product is within specifications
Job Requirements:
• Must be able to lift up to 50 pounds repetitively
• Must be able to stand for majority of shift
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer
Safety Sensitive
GENERAL SHOP HELPER
Catoosa | $14.00 | Order Id: 88116
Pay: $14.00/hr
General Shop Helper - Cutting Table Unload
Catoosa
Pay Rate and Hours:
• Pay: $14.00/hr
• Hours: Monday through Friday, 6:00pm-6:00am
*** While on days the hours are 7AM up to 6PM. Once transitioned to nights the hours are 6PM up to 6AM***
Job Description:
• Efficiently unload glass from Cutting Table
• Properly sort glass to the appropriate racks
• Transport glass from one location to another by carrying or using appropriate machinery
• Read and attach appropriate labels to products
• Use a tape measure to ensure product is within specifications
Job Requirements:
• Must be able to lift up to 50 pounds repetitively
• Must be able to stand for majority of shift
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive
Key Personnel is an Equal Opportunity Employer
INDUSTRIAL SAFETY TECHNICIAN
CATOOSA | $0.00 | Order Id: 88093
Pay: $30-$34/HR [DIRECT HIRE]
Hours: Day 6 AM-2:30 PM
Days: Monday - Friday
Catoosa
Industrial Safety Technician
Industrial Safety Technician Experience and Requirements:
Implements policies and procedures in compliance with local, state, and federal rules and regulations. Implements programs to train employees in work site safety practices, fire prevention, and correct handling techniques for chemicals, toxins, equipment, and other materials. Tours plant to inspect fire and safety equipment, machinery, and facilities to identify and correct potential hazards and ensure compliance with regulations. Inspects organization facilities to detect existing or potential accident and health hazards, makes recommendations for corrective action and follows up to ensure measures have been implemented. Assists in the investigation of accidents and injuries to minimize. Compiles and submits reports as required. Support additional special projects as requested. Provides information, signs, posters, barriers, and other materials to warn of potential and actual safety hazards and to prevent access to hazardous conditions. Associate degree (A. A.) or equivalent from two-year college or technical school; or three-to-four-year related experience and/or training; or equivalent combination of education and experience.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
HEADER CNC DRILL MACHINIST
CATOOSA | $0.00 | Order Id: 88085
Pay: $19+ Depending on Experience
Hours: Night 5 PM-1:30 AM Overtime may occur
Days: Monday - Friday
Catoosa
Header CNC Drill Machinist
Header CNC Drill Machinist Experience and Requirements:
Operate computer numerical control machines to fabricate parts. Loads parts in machine, cycles machine, detects malfunctions in machine operations such as worn or damaged cutting tools by performing the following duties. Set up and operate numerical control machines or machining centers to perform various machine functions such as cutting, drilling, milling, reaming, boring, and broaching of metallic and nonmetallic work pieces. Ability to read and interpret blueprints, planning sheets, sketches, and related technical data to determine tooling requirements, setup procedures, control settings, and machining methods and sequences. 2 years’ experience required.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
PAYROLL ADMINISTRATOR
TULSA | $20.00 | Order Id: 88045
Key Personnel is seeking a Payroll Administrator to work for a company in the East Tulsa area.
Payroll Administrator Hours:
Monday - Friday 8:00 am to 5:00 pm
Payroll Administrator Duties:
Provide excellent customer service and guidance to employees on payroll related issues
Responsible for accurate entry and balancing of time and payroll data for hourly and salaried employees in various company divisions
Enter, W-4 information and additional and recurring payments and deductions, into the SAP/Payroll system for hourly and salaried employees
Perform reviews of manual time sheets to ensure that proper rates are paid
Manual data entry into SAP
Update vacation and PTO quota balances as required
Assist with the validation of employee payroll results in SAP/Payroll after the initial processing of each payroll run
Access employee data and interpret payroll results using the SAP/Payroll system
Responsible for answering the Payroll Email Inbox and providing excellent customer service and guidance to employees on payroll related issues
Respond to payroll inquiries from employees, various external agencies and departments within the company
Respond to written requests for data including employment verifications
Ensure the confidentiality of all employee information
Assist with monthly payroll
Payroll Administrator Job Qualifications:
High School Diploma or equivalent
2 to 5 years of Payroll experience preferred
Must be familiar with federal and state labor regulations
SAP experience preferred
Excellent customer service background
Experience with high volume data entry and meeting deadlines
Proficient in an MS Windows environment
$20-22/hr. DOE
Key Personnel is an equal opportunity employer. A background check and drug test may be required.
#INDAP1
OVERHEAD CRANE OPERATOR
TULSA | $17.00 | Order Id: 88044
Pay: $17/HR
Warehouse
Tulsa
Pay Rate and Hours:
• Pay:17 /HR
• Hours: Monday through Friday, 11:00 pm-7:30 am
Job Description:
• Warehouse helpers will be operating a forklift and overhead crane through the warehouse facility.
Job Requirements:
• Must be able to operate an overhead crane and a forklift. 2 Years + of experience.
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
SAW OPERATOR
TULSA | $0.00 | Order Id: 88038
Pay: $17-$19/HR
Band Saw Operator
Tulsa
Pay Rate and Hours:
• Pay:$17-19 /HR
• Hours: Monday through Friday, 1st 6 am-2:30 pm and 2nd shift 4:30 pm -1 am
Job Description:
• Seeking for qualified candidates with solid hem saw operation experience.
Job Requirements:
• Must have hem saw experience
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
QUALITY ASSURANCE SPECIALIST
OWASSO | $15.00 | Order Id: 88033
Pay: $14.50/hr plus $0.50/hr shift premium
Quality Assurance Technician – 1st Shift
Owasso Location
Pay Rate and Hours:
• Pay: $14.50/hr plus $0.50/hr shift premium
• Hours: Monday through Friday, Start between 4:30am to 7am and work 8 hours.
Job Description:
• Ensuring that daily production operates within company and customer standards.
• Maintain Quality Standards and Integrity
• Utilizing thermometers to assess meat temperatures
• Utilizing tablets and computers to track data.
Job Requirements:
• Basic math skills – able to accurately add, subtract, multiply and divide.
• Ability to read, write and communicate in English.
• Ability to walk up to one mile per day and lift up to 50 pounds.
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
PAINTER-INDUSTRIAL
Jenks | $15.00 | Order Id: 87348
Pay is $15 per hour plus based on experience.
Hours are 6 am to 2:30 pm, Monday through Friday.
South Tulsa
Industrial Painter's Helper
Finishing department, Paint experience would be preferred but we are willing to teach – Primary duty starting will be loading and unloading an automated paint line, maintain paperwork for inventory and other activities that support the function of the automated line.
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
BURN TABLE OPERATOR
TULSA | $0.00 | Order Id: 88030
Pay: $18/hr
Hours: 6:00am to 4:30pm, Monday through Thursday
North Tulsa
Burn Table Job Description
Overview
Function as a burner and metal former by setting up and operating flame-cutting, plasma equipment and presses to produce various designs and shapes from steel plates, pipes, and tubes.
Responsibilities
• Utilizes CNC torch carrier, shape-burning machine, flame cutting torches, plasma cutting torches, and assorted hand tools to prepare raw material for production process,
• Cuts steel materials into a variety of shapes and patterns to print tolerances with commercial-quality cuts at all times,
• Performs mathematical calculations necessary to perform layout of shapes,
• Completes necessary forms (e.g., job orders and time cards),
• Makes structural welds on extruded sleeves,
• Obtains necessary templates and fixtures to properly perform burning operations for predetermined shapes,
• Installs template and completes set-up for producing parts in the most economically efficient manner,
• Loads and unloads material from rack, utilizing assistance from others when necessary,
• Operates presses, forklifts, furnaces, and wheelabrators and makes minor repairs and adjustments to equipment,
• Works from blueprints, sketches, and oral instructions to plan and lay out work to ensure that work is performed to decimal and print tolerances,
• Maintains safe, clean and orderly work space;
Experience
• High School Diploma required
• 3 years of experience in pipeline equipment manufacturing type role,
• Ability to read blueprints, Completed and passed X-Ray Weld Test,
• Ability to lift heavy objects, in compliance with TDW Safety Regulations,
• Ability to grind to field tolerances.
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
BURN TABLE OPERATOR
TULSA | $0.00 | Order Id: 87922
Pay: $18/hr+ ( 2nd shift diff - $3/hr & Weekend shift diff - $5/hr)
Hours: 2nd Shift or Weekend M- Th 4:30 PM – 3:00 AM or Fri – Sun 4:30 AM – 5:00 PM (would train on days)
North Tulsa
Burn Table Job Description
Overview
Function as a burner and metal former by setting up and operating flame-cutting, plasma equipment and presses to produce various designs and shapes from steel plates, pipes, and tubes.
Responsibilities
• Utilizes CNC torch carrier, shape-burning machine, flame cutting torches, plasma cutting torches, and assorted hand tools to prepare raw material for production process,
• Cuts steel materials into a variety of shapes and patterns to print tolerances with commercial-quality cuts at all times,
• Performs mathematical calculations necessary to perform layout of shapes,
• Completes necessary forms (e.g., job orders and time cards),
• Makes structural welds on extruded sleeves,
• Obtains necessary templates and fixtures to properly perform burning operations for predetermined shapes,
• Installs template and completes set-up for producing parts in the most economically efficient manner,
• Loads and unloads material from rack, utilizing assistance from others when necessary,
• Operates presses, forklifts, furnaces, and wheelabrators and makes minor repairs and adjustments to equipment,
• Works from blueprints, sketches, and oral instructions to plan and lay out work to ensure that work is performed to decimal and print tolerances,
• Maintains safe, clean and orderly work space;
Experience
• High School Diploma required
• 3 years of experience in pipeline equipment manufacturing type role,
• Ability to read blueprints, Completed and passed X-Ray Weld Test,
• Ability to lift heavy objects, in compliance with TDW Safety Regulations,
• Ability to grind to field tolerances.
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
CNC LATHE OPERATOR
Tulsa | $0.00 | Order Id: 88029
Pay is $20.85 to $25.86 based on experience, plus shift differential. Hours are 3:30PM – 2:00AM, Monday through Thursday.
North Tulsa Company
CNC Lathe Operator B with Mazak experience
Job Summary
The CNC Lathe Operator sets up and operates standard lathe and CNC machine tools in a highly efficient manner. Has a minimum of rejected parts with maximum productivity. Must be able to operate one or more machines as required to meet production and quality standards with maximum productivity.
Principal Duties and Responsibilities (*Essential)
1. Set up and operate standard CNC Lathe.*
2. Read and understand blueprints and written specifications.*
3. Possess knowledge and ability to use shop mathematics.*
4. Skillfully use all machinist’s hand tools and measuring instruments.*
5. Be capable of shaping metal bars, forgings, and castings to precise dimensions and finishes.*
6. Be familiar with the various metals, speed, and feeds to be used in machining.*
7. Operate one or more machines to meet production and quality standards with maximum productivity.*
8. Be able to lift 5 to 60 pounds on a regular basis.*
9. Be able to reach, bend over, or twist to insure a part is secure in the machine, to measure and/or inspect work to print, to change tools, to set up machinery, and to load/unload the part from the machine.*
10. Be able to stand 40 to 60% of the time in order to reach parts to load, unload, and inspect parts; to print; and to visually observe machine functions.*
11. Be able to walk around the plant to change machines, get blueprints, retrieve parts, etc.*
12. Be able to see, read, and write in order to comprehend safety warnings and do necessary paperwork.*
13. Be able to communicate with supervisors, inspectors, etc.*
14. Be able to learn and have a long term memory for machine controls, machine functions, crane controls and functions, using measuring instruments, reading blueprints/symbols, etc.*
15. Punctuality and regular attendance are important to maintain manufacturing schedules.*
Special Location/Position Requirements:
• Pass Math test and Blue Print Test.
Job Specifications (Work Experience, Skills, Abilities, etc.)
• 2 years’ Lathe experience working in a Manufacturing environment required.
• Mazak - Mazatrol or G-Code experience required.
• Read and understand CNC programs; G-code and/or Mazatrol
• Ability to get up to speed with production requirements quickly
Education Requirements:
High School Diploma or equivalent.
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
This is a Safety Sensitive Role.
Key Personnel is an Equal Opportunity Employer.
MACHINIST
Broken Arrow | $0.00 | Order Id: 88028
Pay: $20.00-$30.00/HR+
Machinist
Broken Arrow location
Pay Rate and Hours:
• Pay: $20.00-$30.00/HR+ DOE
• Hours: Monday through Friday, 6:00am-2:30pm
Job Description:
• Operate mill with FANUC controls
• G&M coding experience
• Manual lathe operation
Job Requirements:
• Covid Vaccination
• High school diploma or equivalent
Benefits:
This is a Direct Hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
MAINTENANCE TECHNICIAN
TULSA | $24.67 | Order Id: 88024
Pay: $24.67 HR
Hours: 3:00 PM- 1:30 AM
Days: Monday - Thursday
North Tulsa
Maintenance Technician
Maintenance Technician Experience and Requirements:
You must have retained knowledge & experience in electrical, hydraulic, and pneumatic.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
#INDLI2
CNC LATHE OPERATOR
Tulsa | $0.00 | Order Id: 87927
Pay is $20.85 to $25.86 based on experience. Hours are 530 AM – 3:30 PM, Monday through Friday
North Tulsa Company
CNC Lathe Operator B with Mazak experience
Job Summary
The CNC Lathe Operator sets up and operates standard lathe and CNC machine tools in a highly efficient manner. Has a minimum of rejected parts with maximum productivity. Must be able to operate one or more machines as required to meet production and quality standards with maximum productivity.
Principal Duties and Responsibilities (*Essential)
1. Set up and operate standard CNC Lathe.*
2. Read and understand blueprints and written specifications.*
3. Possess knowledge and ability to use shop mathematics.*
4. Skillfully use all machinist’s hand tools and measuring instruments.*
5. Be capable of shaping metal bars, forgings, and castings to precise dimensions and finishes.*
6. Be familiar with the various metals, speed, and feeds to be used in machining.*
7. Operate one or more machines to meet production and quality standards with maximum productivity.*
8. Be able to lift 5 to 60 pounds on a regular basis.*
9. Be able to reach, bend over, or twist to insure a part is secure in the machine, to measure and/or inspect work to print, to change tools, to set up machinery, and to load/unload the part from the machine.*
10. Be able to stand 40 to 60% of the time in order to reach parts to load, unload, and inspect parts; to print; and to visually observe machine functions.*
11. Be able to walk around the plant to change machines, get blueprints, retrieve parts, etc.*
12. Be able to see, read, and write in order to comprehend safety warnings and do necessary paperwork.*
13. Be able to communicate with supervisors, inspectors, etc.*
14. Be able to learn and have a long term memory for machine controls, machine functions, crane controls and functions, using measuring instruments, reading blueprints/symbols, etc.*
15. Punctuality and regular attendance are important to maintain manufacturing schedules.*
Special Location/Position Requirements:
• Pass Math test and Blue Print Test.
Job Specifications (Work Experience, Skills, Abilities, etc.)
• 2 years’ Lathe experience working in a Manufacturing environment required.
• Mazak - Mazatrol or G-Code experience required.
• Read and understand CNC programs; G-code and/or Mazatrol
• Ability to get up to speed with production requirements quickly
Education Requirements:
High School Diploma or equivalent.
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
This is a Safety Sensitive Role.
Key Personnel is an Equal Opportunity Employer.
INSTALLER- DRIVER
TULSA | $0.00 | Order Id: 87998
Pay: $15-$19/HR - Depending on Experience
Hours: 8 AM - 4:30 PM with a 30 Minute Lunch
Days: Monday-Friday
East Tulsa
Installer-Driver
Looking for an experienced commercial glazier must have valid D.L.
Driver-Installer Job Description:
-Commercial glass installer
-Aluminum fabrication
-Aluminum door repairs
Relatable Experience:
-Carpentry: Hanging Doors, Installing Windows - Related skills applying to Carpentry
Requirements:
Valid Drivers Lic and a Clean MVR
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com or text 918-699-8554 for additional information.
Our office is located at at 9717 E. 42nd Place (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the US.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
SYSTEMS TECHNICIAN MAINTENANCE
TULSA | $22.80 | Order Id: 87996
Systems Technician - Maintenance
$22.80/hr
M-F 3:30pm - 2am
North Tulsa
Your role will be to perform all maintenance on the facility such as electrical wiring, and needs to know basic safety requirements relating to hazardous materials.
Electrical experience is a MUST, Manufacturing experience is preferred but not required.
Position Purpose and Requirements
Performs overall general and preventative maintenance of mechanical and electrical components of production equipment.
Basic Requirements:
At least 3 years experience in maintenance related field
Additional Requirements
Qualified candidates, excluding current company employees, must be legally authorized on an unrestricted basis (US Citizen, Legal Permanent Resident, Refugee or Asylee) to be employed in the United States. The company does not anticipate providing employment related work sponsorship for this position (e.g., H-1B status)
Must have organization skills, effective communication skills with both technical and professional staffAbility to troubleshoot problems and offer solutions on all industrial systems
Knowledge of preventive maintenance
Ability to work efficiently and with a sense of urgency
Ability to demonstrate overall safe work behavior; including the utilization of proper safety equipment and adhering to safety guidelines
Physical Requirements:
Moderate lifting, 15-44 pounds
Moderate carrying, 15-44 pounds
Reaching and working above shoulders
Use of fingers, both hands required
Depth perception required
Able to walk, stand, crawl, kneel, bend up to 10 hours per day
Climbing using both legs and arms
Ability to distinguish basic colors and shades of colors
Hearing (aid permitted)
Desired Skills:
Possess a working knowledge of 480 volt, 277 volt, 240 volt, 208 volt and 120/24 volt systems with the ability to implement these voltages, including routing of all conduit and wires installing breaker panels, disconnects, transformers, lighting, etc. and performing terminations without supervision
Basic knowledge of electrical, mechanical and electro-mechanical components
Basic knowledge of industrial safety requirements related to hazardous, flammable and explosive materials and environments
Ability to self-manage work priorities
Ability to specify the needed parts for equipment or process failures
Forklift Repair Experience-Not required but preferred
Mechanical and Electrical Aptitude
Troubleshooting Abilities
High School or GED preferred
Competencies:
Ethics and Navistar Values
Positive Attitude
Action Oriented
Creativity
Listening
Peer Relationships
Understanding Others
Apply online at www.keyjobs.com
Safety Sensitive
Key Personnel is an Equal Opportunity Employer
CNC MACHINIST
TULSA | $0.00 | Order Id: 85360
Pay $17 plus depending on experience. Hours: 6am - 6pm, Friday, Saturday and Sunday
North Tulsa
CNC Machinist
Essential Duties & Responsibilities
To perform this job successfully, the hire must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Provides excellent customer service and collaboration with internal and external customers
Performs “close tolerance” machining, setups and utilizes a variety of precision measuring instruments
Promotes safety awareness, enforces appropriate company polices, and assures all policies and procedures are adhered to daily
Efficiently operates precision CNC Machining and/or gear cutting equipment
Ensures machines and equipment maintained effectively and in good working order
Performs preventive maintenance on equipment and machines to effectively keep in good working order
Minimum Qualifications
Education: High school diploma or equivalent
Minimum Qualifications:
Ability to demonstrate a basic to intermediate knowledge level of numeric controls, specialized tooling, and other CNC Machining technology
Ability to learn and maintain company policies, procedures, and routines
Experience in performing setups, tool changes, and finished parts inspection using various precision measurement tools
Ability to demonstrate a basic level of Microsoft Office Applications (Word, Excel, Outlook), and be willing and able to learn other company software programs as needed.
Ability to read and comprehend blueprints, instructions and understand tolerances
Must be able to lift heavy objects on a as needed basis
Ability to demonstrate an intermediate level of good mechanical and mathematical aptitude
Must be flexible to perform a variety of assignments and adapt to changing conditions
Demonstrates excellent organizational, communication, and customer service skills
Ability to communicate efficiently and effectively both orally and in writing, as well as be able to interpret written instructions and specifications
Preferred Qualifications
One (1) year CNC Machinist experience or training
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
ASSEMBLY CLASS A
CATOOSA | $0.00 | Order Id: 87934
Pay: $19 + Depending on Experience
Hours: Day 6:00 AM – 2:30 PM & Night 5:00 PM -1:30 Shifts Available
Days: Monday - Friday
Catoosa
Assembler Class A
Assembler Class A Experience and Requirements:
• Read blueprints and build bundles/sections by following prints.
• Calculate expansion measurements.
• Read expansion measurements.
• Set up and Adjust Expansion machine/gun settings.
• Tube Expansion.
• All plug and cover duties including choosing suitable thread lubricant.
• Soap Bubble Testing, Hydro Static Testing, and preparation for Helium Testing.
• Over Head Crane and Forklift operation.
• The ability to detect Safe and Unsafe Acts and the willingness to stop an unsafe act.
• Communication skills to teach others and to lead others in all Bundle/Section Assembly Task in the Air Cooled Heat Exchanger world.
• If no Air-Cooled Heat Exchanger experience, Shell and Tube Industry Experience may be adequate.
• Work on your feet six days per week while lifting, pushing, pulling, bending with as much as 50 lbs of weight.
• Rigging knowledge for Overhead cranes and lifting in general.
• Wear eye, ear, and steel toe foot protection at all times.
• Use Cell phones only on break times during work shifts.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
GENERAL WAREHOUSE WORKER
TULSA | $18.00 | Order Id: 87921
Pay: $18.00/HR
Warehouseman I
North Tulsa location
Pay Rate and Hours:
• Pay: $18.00/HR
• Hours: Monday through Friday, 6:00am-2:30pm
Job Description:
• Inventory
• Order picking
• Stocking
• Packing
• Maintain warehouse
• Shipping back-up
• Receives pick lists, efficiently and accurately kits, and release completed kits to production floor
Job Requirements:
• 1-2 years of material handler and inventory cycle count experience
• Forklift operator experience
• Must be able to lift 50 pounds
• High school diploma or equivalent
• Basic computer skills
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
WELDER
Jenks | $0.00 | Order Id: 87915
Pay: $20.00/HR+
Welder
South Tulsa location
Pay Rate and Hours:
• Pay: $20.00-$22.00/HR+ DOE
• Hours: Monday through Friday, 6:00am-2:30pm with overtime as needed
Job Description:
• Lays out, fits and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, winch parts, post driver parts, according to blueprints and knowledge of welding and metallurgy.
• Selects equipment and plans layout, assembly and welding applying knowledge of geometry, physical properties of metal machining weld shrinkage and welding techniques.
• Sets up equipment and welds parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment.
• Required to maintain accurate and timely transactions in the ERP system.
• Performs related tasks, such as thermal cutting and grinding.
• Have a thorough knowledge & experience in blueprint reading, use of welding tools, welding techniques, layout & fit up.
Job Requirements:
• Must have successfully passed required tests including, but not limited to: a) FLAW (Fluxcore), b) SMAW (Stick), c) GMAW (Mig).
• one to four years related experience in welding of products, pieces and parts
• High school diploma or general education degree (GED) or successful completion of a vocational welding school
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
PRESS OPERATOR
Tulsa | $18.00 | Order Id: 87881
Pay: $19 HR
Hours: 2:30 PM- 11:00 PM
Days: Monday - Friday
Broken Arrow
Press Operator
Press Operator Experience and Requirements:
For the Press Operator position, you will need to have a mechanical aptitude with some prior experience working with machines.
During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
#INDLI2
TUBE MILL OPERATOR
TULSA | $0.00 | Order Id: 87875
Pay: $19-$20 HR Depending on Exp
Tube laser operator
Tulsa
Pay Rate and Hours:
• Pay:19-$20 /HR
• Hours: Monday through Friday, 2:30 pm-11:00 pm
Job Description:
• Will need to to operate a tube laser machine
Job Requirements:
• Must have 1+ year of related experience
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
MACHINIST-MANUAL
TULSA | $0.00 | Order Id: 87640
Pay: $24.81/HR+
Manual Machinist
East Tulsa location
Pay Rate and Hours:
• Pay: $24.81-$28.31/HR+ DOE
• Hours: Monday through Friday, 7:00am-3:30pm
Job Description:
• Operate Engine Lathes, Radial Drill/Mill(Bridgeport, Mecof), keyway, balance, TOS
• Plans how operations will be performed on the machine. This includes part holding and alignment, proper tooling. Read and follow complex blueprints and sketches, make machine and tooling adjustments for a wide range of parts, operate both part and tool probing for accurate measurements, along with a variety of precision measuring instruments to verify exact tolerances and finishes.
• Perform required mathematical computations. Run through involved tooling and process
• Perform minor maintenance and servicing of machines as cleaning and oiling machines.
• Operate crane, forklift and other power equipment.
• Set up and operate other assigned machine tools.
Job Requirements:
• Completion of two to four years of Trade/Technical School, or equivalent, requiring use of advanced shop mathematics, together with the use of complicated drawings, specifications, charts, tables, handbook formulas, and a wide variety of precision measuring instruments.
• High School Diploma
• Must be able to read and write English
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
DENTAL BILLER
Tulsa | $19.00 | Order Id: 87721
Key Personnel is searching for an experienced Dental Biller **Oral Surgery experience preferred!**
Dental Biller Pay Rate and Hours:
Dental Biller Pay: $18-$20 DOE
Monday- Friday 8am to 5pm
Dental Biller Duties:
Collecting 100% of what is rightfully owed
Submitting clean claims within 24 hours of being batched
Posting payments accurately within 24 hours along with proper adjustments
Following up on aged claims over 30 days every 14 day
*Safety Sensitive Role*
Key Personnel is an Equal Opportunity Employer. A drug screen and background may be required.
LPN
TULSA | $20.00 | Order Id: 86603
LPN Phone Triage Nurse
Key Personnel is seeking candidates for an LPN phone triage nurse.
Hours: Monday-Friday, 8am-5pm
Pay Range: $20.00 - $24.00 depending on experience.
Job Duties:
Strong oral and written communication skills.
Possess decision making, organizational and excellent nursing skills
Strong knowledge of patient care and clinical patient management including but not limited to telephone triage & patient flow
Provides general patient care and performs injections
Strong electronic health record experience
Strong OB/GYN experience preferred
COVID Vaccine is required * Safety Sensitive Role
Pay
· $20-24/hr DOE
· Paid Every week!
· Direct Deposit and/or Paycards Available
Key Personnel is an Equal Opportunity Employer. A drug screen and background may be required.
MEDICAL ASSISTANT
TULSA | $19.00 | Order Id: 87633
Key Personnel is seeking Certified Medical Assistant candidates for multiple jobs!
Full time and part time available!
Medical Assistant Pay Rate:
$18+/hr. DOE. Weekly Pay!
Full time and Part Time Opportunities!
Medical Assistant Duties:
Escort patients to and from the exam room
Records patient data including but not limited to, vital signs, height, weight, allergies & medication changes.
Obtains all necessary consents prior to treatment or procedure
Schedules surgeries, patient referrals, and appointments as required.
Prepare and stock exam rooms & procedure rooms
Cleaning and processing of instruments and equipment as needed
Trained to give injections
Maintain and efficient patient flow
Displays excellent customer service, verbal & written communication and attention to detail.
Covid Vaccination required
WELDER-PIPE
Tulsa | $25.00 | Order Id: 87843
Pay: $25/HR
Hours: 5:00 am – 3:30 pm
Days: Monday-Thursday
Tulsa
PIPE WELDER
Description and Requirements
The Pipe Welder will need to be able to do the following:
Tulsa company seeking for a Pipe Welder. Must pass a Weld Test: 6G position in a combination of MIG and Stick., open root, with 7018-1 filler metal and cap. Must have 2+ years of experience.
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at at 9717 E. 42nd St (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
MACHINIST-MANUAL
Sapulpa | $0.00 | Order Id: 87785
Pay: $18-$22/HR Depending on Experience
Hours: 6am – 4:30pm
Days: Monday-Friday
Sapulpa
Manual Machinist
Manual Machinist Duties and Requirements:
Ability to run a press brake up to 325 tons. At least 3 years experience preferred. Process to form structural material to many different angles and bends. Materials vary from thin gauge up to 1 ¼” thick. Product types include Cones, Transitions and structural parts.
Duties:
To machine parts according to specified drawing provided from customer or to company specification with capable machinery provided in the shop. Knowledge of the machine, tooling, maintenance of the machine Duties:
• Duties are to be performed using SAFETY practices and procedures to ensure a safe working environment for you and your fellow workers. Safety training will be provided by the facility but it is your responsibility to be aware of any safety hazards or report any unsafe work conditions.
• To machine parts in accordance to customer drawings utilizing the shop machinery. Machine area should be kept in a clean and orderly manner, free from trash and debris.
• Ensure safe and effective operation of equipment by completing preventive maintenance requirements; calling for repairs; maintaining tooling inventories; Filling out inspection cards; and evaluating new equipment and techniques.
• Provide information by answering questions and requests.
• Maintains supplies inventory by checking stock to determine inventory level; anticipating needed supplies; placing and expediting orders for supplies; verifying receipt of supplies. Complete operational requirements on time and when needed expediting work results. Maintain professional work ethic and technical knowledge.
• Contributes to team effort by accomplishing related results as needed.
• Any other duties required by managers or department supervisor to accomplish production or shop needs
Skills/qualifications:
• Pass the prequalifying machinist exam.
• Knowledge of manual machinery general maintenance and running the machines. Mathematical calculations as needed for machining duties.
• Machinist tooling knowledge – Ability to read a tape measure, Calipers, micrometer, gauges Shop safety
• Motivated and willingness to learn
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at at 9717 E. 42nd Place (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
PRESS BRAKE OPERATOR
Sapulpa | $0.00 | Order Id: 87784
Pay: $18-$22/HR Depending on Experience
Hours: 6am – 4:30pm
Days: Monday-Friday
Sapulpa
Press Brake Operator
Press Brake Operator Duties and Requirements:
Ability to run a press brake up to 325 tons. At least 3 years experience preferred. Process to form structural material to many different angles and bends. Materials vary from thin gauge up to 1 ¼” thick. Product types include Cones, Transitions and structural parts.
Duties:
• Maintain a clean and organized work area. Understand and work by company safety procedures.
• Perform duties as needed in other areas in shop in order to meet production goals.
• Ensures operation of equipment by completing preventive maintenance requirements; calling for repairs; maintaining equipment inventories; evaluating new equipment and techniques.
• Provides information by answering questions and requests.
• Communicates repairs or maintenance to machine as soon as problem arises or identified.
• Maintains supplies inventory by checking stock to determine inventory level; anticipating needed supplies.
• Completes operational requirements and expediting work results.
• Maintains professional and technical knowledge and is on time and maintains a good attendance.
• Contributes to safe work environment and attends safety meetings.
• Maintains physical ability to perform tasks and communicate physical limitations to the Production Manager as needed.
• Understands how to operate press brake using proper safety procedures.
• Understands how to perform all emergency procedures to shut down machine safely and confirms Lock Out / Tag Out by Production Manager.
Skills/qualifications:
• Professionalism, Problem Solving, Supply Management, Verbal Communication, Teamwork ability.
• Familiar or willingness to learn other machines or duties
• Motivated and willingness to learn
• Knowledge of Math & English, reading a tape measure, how to read a blueprint, use tools correctly, and work with machinery.
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at at 9717 E. 42nd Place (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
MACHINE OPERATOR
Sapulpa | $0.00 | Order Id: 87781
Pay: $18-$22/HR Depending on Experience
Hours: 6am – 4:30pm
Days: Monday-Friday
Sapulpa
Plate Roll Operator
Plate Roll Operator Duties and Requirements:
• Ability to run manual plate roll. At least 2 years experience preferred, but we can train. Process to roll steel material from a flat sheet. Materials vary from thin gauge up to 1” thick. Product types include Cylinders, Half Cylinders, Weld pads, and other structural parts. Duties:
• Maintain a clean and organized work area.
• Understand and work by company safety procedures. Perform duties as needed in other areas in shop in order to meet production goals.
• Ensures operation of equipment by completing preventive maintenance requirements; calling for repairs; maintaining equipment inventories; evaluating new equipment and techniques.
• Provides information by answering questions and requests.
• Maintains supplies inventory by checking stock to determine inventory level; anticipating needed supplies and keeping up with job schedule
• Completes operational requirements and expediting work results.
• Maintains professional and technical knowledge, maintain a good attendance and on time.
• Contributes to safety work environment and attends safety meetings.
• Understands how to operate plate rolls using proper safety procedures. Skills/qualifications:
• Professionalism, Problem Solving, Supply Management, Verbal Communication, Teamwork ability.
• Familiar or willingness to learn other machines or duties
• Motivated and willingness to learn
• Knowledge of Math, English, read a tape measure and work with machinery.
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at at 9717 E. 42nd Place (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
CDL/TRUCK DRIVER/MATERIAL HANDLER
CATOOSA | $0.00 | Order Id: 87744
Pay: $19 + Depending on Experience
Hours: 6 AM-4:30 PM
Catoosa
CDL/TRUCK DRIVER/MATERIAL HANDLER
THIS IS A DIRECT HIRE POSITION
Job Description:
Drive semi with trailer some with items weighing up to 50 tons and 20’ wide. Over-width and overweight. Supply trailers to the areas that require them as needed, i.e.: structure, header bay for transporting heads to stress, heat treat, assembly for load out of completed units. Ability to load and unload materials that are to be transported to and from vendors. Help unload and sort, mark, and organize galvanized loads after they are checked if help is needed. Transport loads to and from vendors inside the port and around the Tulsa metro area as needed. Any other transportation needs for all the plants as directed by supervision or lead persons. Help with any material handling that may be needed anywhere in the shop as time allows. Must meet all requirements of the Fleet Policy. Computer skills is preferred to cross-train in all areas of the shipping and warehouse departments. Perform daily inspections on the company trucks and report any need for repairs to the Supervisor and maintenance. Document and maintain equipment and yard inventory of coolers and bundles. Must have a valid Oklahoma driver’s license, must be a qualified competent driver, meet requirements of the Department of Transportation, Thermal Solutions Fleet Policy, and shall maintain an acceptable driving record.
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd Place (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
WELDER-PIPE
Tulsa | $32.00 | Order Id: 85055
Pay: $32/hr Hours: 6am-4:30pm Monday- Thursday
West Tulsa
Pipe-Welder
Description: Assembling, installing and repairing pipe components and systems according to specifications. Inspecting materials, equipment, and tools. Maintaining supplies, equipment, and tools. Preparing working materials by clamping, cutting or applying chemical solutions to piping.
Must pass welding test :
Jinx 6G
6 in extra heavy mid flux core fill and pass 6G
6 in standard mid all the way out 1G
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd ST (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
#INDLI2
FACILITIES MAINTENANCE SUPPORT TECHNICIAN
TULSA | $30.60 | Order Id: 87451
Electrical/Mechanical Maintenance Support Tech
Currently, we are seeking qualified candidates for Industrial Maintenance Mechanic/Electrician positions to join our Tulsa, Oklahoma manufacturing location. The positions and shifts we have available are as follows:
Position Requirements:
? 3 years experience in repair and maintenance of industrial equipment.
? Experience troubleshooting high (480) & low (24) voltage electrical circuits.
? Understanding of PLC’s and ladder diagrams.
? Electrical knowledge (VFD’s, power supplies, relays, contacts, etc.)
? Mechanical knowledge (shafts, bearings, chains, sprockets, etc.)
? Experience with hydraulics and pneumatics.
? Ability to read electrical and/or hydraulic prints.
? Diagnostic ability to separate mechanical and electrical issues.
? Must be able to work in a team environment.
? Ability to lift up to 50 pounds occasionally.
? Ability to stoop, kneel, squat and stand for long periods of time.
? Must be able to obtain Forklift and Aerial Lift operator licenses - Training will be provided for these licenses
? Must be able to work at heights
? Ability to demonstrate overall safe work behavior; including the utilization of proper safety equipment and adhering to safety guidelines
? Must be able to complete all safety testing requirements
? Experience with metal forming presses, welding/fabrication and/or robotics would be a plus.
? MUST SUBMIT RESUME WITH APPLICATION
? High School Diploma or equivalent required
FACILITIES MAINTENANCE PROCESS TECHNICIAN
TULSA | $31.85 | Order Id: 87452
Electrical/Mechanical Maintenance Support Tech
Currently, we are seeking qualified candidates for Industrial Maintenance Mechanic/Electrician positions to join our Tulsa, Oklahoma manufacturing location. The positions and shifts we have available are as follows:
Position Requirements:
? 3 years experience in repair and maintenance of industrial equipment.
? Experience troubleshooting high (480) & low (24) voltage electrical circuits.
? Understanding of PLC’s and ladder diagrams.
? Electrical knowledge (VFD’s, power supplies, relays, contacts, etc.)
? Mechanical knowledge (shafts, bearings, chains, sprockets, etc.)
? Experience with hydraulics and pneumatics.
? Ability to read electrical and/or hydraulic prints.
? Diagnostic ability to separate mechanical and electrical issues.
? Must be able to work in a team environment.
? Ability to lift up to 50 pounds occasionally.
? Ability to stoop, kneel, squat and stand for long periods of time.
? Must be able to obtain Forklift and Aerial Lift operator licenses - Training will be provided for these licenses
? Must be able to work at heights
? Ability to demonstrate overall safe work behavior; including the utilization of proper safety equipment and adhering to safety guidelines
? Must be able to complete all safety testing requirements
? Experience with metal forming presses, welding/fabrication and/or robotics would be a plus.
? MUST SUBMIT RESUME WITH APPLICATION
? High School Diploma or equivalent required
ADVANCED AUTO TECHNICIAN
TULSA | $22.00 | Order Id: 87337
EV Auto Technician
Pay: $22/hr
Hours: Day 5 AM – 3:30 PM
Weekend: Monday-Thursday
Tulsa
Experience and Requirements
Perform safe, quality bus repair work. Provide feedback to Group Leader, Team Leader or BTL on all assembly discrepancies found on the product and report to the appropriate personnel.
• Capable of following a set inspection check list verifying quality products.
• Capable of repairing all bus quality defects identified as outlined on the vehicle inspection checklist or FMVSS.
• Able to cross-train other team members in the repair process and procedures;
• Provide mobile repair assistances as needed on all units. Daily application of mechanical aptitude and skills as well as practical problem-solving tools to diagnose and resolve production related problems;
• Collect data and report out on repairs made and assist with providing corrective assembly or engineering product actions;
• Personal Safety and vehicle quality at the forefront of any repairs;
• Able to identify, diagnose and repair any vehicle mechanical or electrical issues;
• Excellent problem solving and follow up skills;
• Automotive knowledge (Body, fab, electrical, and Chassis desired)
• Ability to work overtime, flex schedule, often on short notice.
• Able to comprehend engineering documents (Prints, FEMA, etc.)
• Ability to work in a non-climate-controlled environment.
• Able to stand up to 50% of 10-hour workday.
• Depth perception required.
• Climbing using both legs and arms;
• Moderate lifting and carrying;
• Positive attitude, ethics and International’s values which support our Company’s values and a healthy, high performance culture;
• Strong Communication skills both written and oral;
• Self-Motivated with ability to work under pressure;
• Self-starter and results driven with a sense of urgency;
• Strong Mechanical and/or electrical repair background on busses / trucks and engine repair.
Education / Certifications
• High School Diploma or Equivalent (GED)
• At least 1 year of automotive assembly or repair experience
Background Check and Drug Screen required.
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd St (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
#INDLI2
ASSEMBLY-MECHANICAL
Broken Arrow | $0.00 | Order Id: 87274
DIRECT HIRE OPPORTUNITY
Pay: $16.00 an hour Plus DOE
Hours: 7am - 5:30pm, Monday-Friday
Broken Arrow Direct hire mechanical and electrical assembly positions with overtime opportunities available.
Applicants must be eager and willing to learn, and must be able to read a tape measure.
COVID Vaccination Required
The company offers bonuses, short term and long term disability, a competitive 401k plan, paid vacation, paid holidays, and offers health, dental and vision plans.
In order to make the best use of your time, only qualified applicants will be contacted. Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3 pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
#INDLI2
ASSEMBLY-MECHANICAL
Jenks | $15.00 | Order Id: 87267
Pay is $15 per hour. Hours are 6am to 2:30pm, Monday through Friday with possible overtime
South Tulsa
Mechanical Assembler
1. Successful working experience with geared mechanisms, hydraulic systems, electrical systems, pneumatic systems, welding techniques, painting techniques with air and pump supplied equipment
2. Assemble units per drawing specifications
3. Fastens parts together with bolts, screws, speed clips, rivets, or other fasteners
4. Removes small quantities of metal with hand files and grinders to produce close fit between parts
5. Operates hydraulic and manual presses to assist in assembly operation
6. Assists with performing test procedures on assemblies as directed
7. Learns to repair and maintain mechanical equipment
8. Assists in painting and parts / assembly cleaning when necessary or required
9. Perform material handling and / or track parts to receive into assembly
10. Be able to drive forklift truck, hand trucks or manually move parts as directed or required
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
ASSEMBLY-MECHANICAL
Broken Arrow | $0.00 | Order Id: 87274
DIRECT HIRE OPPORTUNITY
Pay: $16.00 an hour Plus DOE
Hours: 7am - 5:30pm, Monday-Friday
Broken Arrow Direct hire mechanical and electrical assembly positions with overtime opportunities available.
Applicants must be eager and willing to learn, and must be able to read a tape measure.
COVID Vaccination Required
The company offers bonuses, short term and long term disability, a competitive 401k plan, paid vacation, paid holidays, and offers health, dental and vision plans.
In order to make the best use of your time, only qualified applicants will be contacted. Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3 pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
#INDLI2
CNC MACHINIST
TULSA | $0.00 | Order Id: 85361
Pay $17 plus depending on experience. Hours: 6pm - 6am, Friday, Saturday and Sunday
North Tulsa
CNC Machinist
Essential Duties & Responsibilities
To perform this job successfully, the hire must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Provides excellent customer service and collaboration with internal and external customers
Performs “close tolerance” machining, setups and utilizes a variety of precision measuring instruments
Promotes safety awareness, enforces appropriate company polices, and assures all policies and procedures are adhered to daily
Efficiently operates precision CNC Machining and/or gear cutting equipment
Ensures machines and equipment maintained effectively and in good working order
Performs preventive maintenance on equipment and machines to effectively keep in good working order
Minimum Qualifications
Education: High school diploma or equivalent
Minimum Qualifications:
Ability to demonstrate a basic to intermediate knowledge level of numeric controls, specialized tooling, and other CNC Machining technology
Ability to learn and maintain company policies, procedures, and routines
Experience in performing setups, tool changes, and finished parts inspection using various precision measurement tools
Ability to demonstrate a basic level of Microsoft Office Applications (Word, Excel, Outlook), and be willing and able to learn other company software programs as needed.
Ability to read and comprehend blueprints, instructions and understand tolerances
Must be able to lift heavy objects on a as needed basis
Ability to demonstrate an intermediate level of good mechanical and mathematical aptitude
Must be flexible to perform a variety of assignments and adapt to changing conditions
Demonstrates excellent organizational, communication, and customer service skills
Ability to communicate efficiently and effectively both orally and in writing, as well as be able to interpret written instructions and specifications
Preferred Qualifications
One (1) year CNC Machinist experience or training
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
CNC MACHINIST
TULSA | $0.00 | Order Id: 85360
Pay $17 plus depending on experience. Hours: 6am - 6pm, Friday, Saturday and Sunday
North Tulsa
CNC Machinist
Essential Duties & Responsibilities
To perform this job successfully, the hire must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Provides excellent customer service and collaboration with internal and external customers
Performs “close tolerance” machining, setups and utilizes a variety of precision measuring instruments
Promotes safety awareness, enforces appropriate company polices, and assures all policies and procedures are adhered to daily
Efficiently operates precision CNC Machining and/or gear cutting equipment
Ensures machines and equipment maintained effectively and in good working order
Performs preventive maintenance on equipment and machines to effectively keep in good working order
Minimum Qualifications
Education: High school diploma or equivalent
Minimum Qualifications:
Ability to demonstrate a basic to intermediate knowledge level of numeric controls, specialized tooling, and other CNC Machining technology
Ability to learn and maintain company policies, procedures, and routines
Experience in performing setups, tool changes, and finished parts inspection using various precision measurement tools
Ability to demonstrate a basic level of Microsoft Office Applications (Word, Excel, Outlook), and be willing and able to learn other company software programs as needed.
Ability to read and comprehend blueprints, instructions and understand tolerances
Must be able to lift heavy objects on a as needed basis
Ability to demonstrate an intermediate level of good mechanical and mathematical aptitude
Must be flexible to perform a variety of assignments and adapt to changing conditions
Demonstrates excellent organizational, communication, and customer service skills
Ability to communicate efficiently and effectively both orally and in writing, as well as be able to interpret written instructions and specifications
Preferred Qualifications
One (1) year CNC Machinist experience or training
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
In order to make the best use of your time, only qualified applicants will be contacted. Apply on-line at www.keyjobs.com.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.
WELDER-TIG
BROKEN ARROW | $0.00 | Order Id: 84422
Pay is $22-$28/HR
Fitter/Welder A (Tig) (Make sure they can do Fitting also.)
East Broken Arrow
Pay Rate and Hours:
• Pay is $22-$28/HR
• Hours: Monday - Friday (Occasional Saturdays, sometimes half days, sometimes full days) (Sometimes 10 hour shift, sometimes 12 hour shift), 5:00am – 6:00pm & Night shift 5:30pm-3:30am or 4:30am
JOB SUMMARY:
Fit-up and weld carbon steel and stainless-steel assemblies in accordance with established Welding Procedure Specifications (WPS) and work instructions to achieve specified weld quality that meets criteria of post weld testing requirements. Maintain welding equipment, tools, and supplies in safe working order. Must be able to function effectively in a team-based environment, maintain a clean work are, maintain HSE compliance standards including proper utilization of all required PPE and adherence to related safety procedures.
JOB QUALIFICATIONS:
• Specialized welding training and/or 8+ years of related welding experience with a demonstrated skill proficiency at an advanced level, or an equivalent combination of training, experience, and skill proficiency. • Must be skilled in at least 3 of the following processes GMAW, FCAW, SMAW, GTAW and saw. • Must pass a 3g plate test in Mig/Fluxcore. • Must pass a 6g all Tig with a 1/2“ schedule 160 pipe. • Must consistently demonstrate code quality. Must be proficient in the following codes: API, B313, UW51, UW52, B1.1, STS, etc. • Must possess a mechanical aptitude, and be able use various measuring equipment. • Must be able to use positioners and pinwheels. • Must have demonstrated experience with set up, layout, blueprint reading, weld symbols, and joint configuration. • Must be familiar with mismatch tolerances. • Experience in the petrochemical industry preferred. • Must be skilled fitter with verifiable experience • Must pass a written fitter test • Must maintain welding equipment, tools, and supplies in a safe working order • Must be able to perform duties with little or no supervision
MENTAL REQUIREMENTS:
Must be able to read and understand blueprints/engineering specifications. Must possess sufficient interpersonal skill to interact effectively with persons inside and outside the Company to accomplish job tasks. Must have the ability to perform mathematical calculations related to job requirements including trigonometry and geometry. Must be able to work under stress and meet deadlines. Must be able to maintain and process job-related paperwork effectively. Must be able to handle multiple priorities.
PHYSICAL REQUIREMENTS:
Must be able to go up and down stairs, perform unaccompanied travel, and communicate effectively. Must have physical stamina to stand 8 or more hours per day and operate welding equipment. Must be able to rig and operate equipment to move heavy loads. Must be able to lift/maneuver 70lbs unassisted. Position requires standing or walking all the workday. Frequently involves stooping and kneeling. Must possess sufficient visual acuity and depth perception to accomplish job tasks. Must possess manual dexterity such as reaching, handling, fingering, and touching to effectively handle material and operate welding equipment. Must be able to tolerate shop environment and exposures associated with welding and industrial equipment manufacturing and apply appropriate safety equipment when required. Must be able to work overtime as required. Must not present a risk of injury to self or others while engaged in Company duties.
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer
Safety Sensitive
TECHNICIAN-HVAC
TULSA | $26.27 | Order Id: 84811
Pay: $26.27 per hour. Hours: 5:30am to 4pm, Monday through Thursday
North Tulsa
HVAC Technician- Maintenance Level 5
The HVAC Technician performs general manufacturing production and non-production machine and equipment maintenance. Performs preventive and predictive maintenance to ensure maximum up-time.
Works safely and follows all required PPE and Safe work rules.
• Receives and manages time sensitive work order assignments.
• Reads hydraulic and pneumatic blueprints and repairs hydraulic and pneumatic systems.
• Troubleshoots and repairs production and non-production machines and equipment.
• Troubleshoots and repairs motor control and drive systems, heating and cooling equipment, industrial control systems, industrial doors, and lighting and electrical systems.
• Performs metal fabrication, welding, and heavy equipment repair.
• Must be willing to work any shift.
• All other duties as assigned.
Basic Requirements: (Minimum Experience)
• High School Diploma or GED
• Current, active journeyman or greater HVAC license
Physical Requirements
• Moderate lifting and carrying 15-44 pounds.
• Use of fingers, both hands, reaching and working above shoulders
• Depth perception required.
• Able to walk, stand, crawl, climb, kneel, bend up to 10 hours per day.
• Ability to follow written and verbal instructions.
• Ability to read and specify the needed parts for equipment or process failures.
Desired Skills
• Associates Degree or Certificate in Industrial Maintenance
• Prefer three years’ experience in troubleshooting, installing, and repairing: PLCs, welding equipment, heavy equipment, HVAC equipment, and Rite Hite Industrial door systems
• Experience using Microsoft Office.
• Possess a basic working knowledge and understanding of industrial electrical systems with the ability to use a Volt/Ohm Meter.
• Basic knowledge of hand tools, ability to disassemble and reassemble using proper equipment.
• Basic knowledge of electrical, mechanical, hydraulic, and pneumatic components.
• Basic knowledge of industrial safety requirements related to hazardous, flammable, and explosive materials and environments.
• Must have organization skills and effective communication skills with both technical and professional staff.
• Knowledge of preventive maintenance
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3 pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
MECHANIC-DIESEL
Tulsa | $0.00 | Order Id: 84541
Pay: $18-30 DOE Hours: 7am-4pm, Monday - Friday
East Tulsa
Diesel Mechanic
Duties and Responsibilities:
Repairs product line equipment according to Company standards.
Performs daily maintenance on all auxiliary items of equipment.
Conducts preventive maintenance and lubrication on all Company equipment.
Performs main component changes on engines, pumps, transmission, etc.
Develops skills on basic electrical and hydraulic systems and operation of main and auxiliary
equipment for maintenance purposes.
Completes DOT inspection and auxiliary reports after unit inspection is completed.
Must have own hand tools and power tools.
Minimum 5 years’ experience (Or trade school Graduate).
Troubleshooting electronic controls for various equipment.
Rebuilding engines and transmissions.
Physical Demands:
Ability to frequently lift up to 50 lbs. Able to lift 65 lbs from floor to shoulder level occasionally.
Ability to occasionally lift, carry, push or pull up to 100 lbs.
Requires frequent bending, stooping, kneeling, crouching, crawling, climbing, balancing, lifting,
carrying, and reaching or handling with arms, hands and fingers. Also crawling and working in
narrow spaces.
Requires frequent repetitive movements, i.e. hammering, turning wrenches, or used screwdrivers.
Manual dexterity sufficient to work with fingers.
Normal vision with or without corrective lenses.
Exposed to cold, heat, noise mechanical/electrical fume or odor.
Will be required on occasion to work more than 8 hours on one shift
Will be required to pass a physical and a drug screen
In order to make the best use of your time, only qualified applicants will be contacted.
Our office is located at 9717 E. 42nd Place (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3 pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer.
WELDER-TIG
BROKEN ARROW | $0.00 | Order Id: 84422
Pay is $22-$28/HR
Fitter/Welder A (Tig) (Make sure they can do Fitting also.)
East Broken Arrow
Pay Rate and Hours:
• Pay is $22-$28/HR
• Hours: Monday - Friday (Occasional Saturdays, sometimes half days, sometimes full days) (Sometimes 10 hour shift, sometimes 12 hour shift), 5:00am – 6:00pm & Night shift 5:30pm-3:30am or 4:30am
JOB SUMMARY:
Fit-up and weld carbon steel and stainless-steel assemblies in accordance with established Welding Procedure Specifications (WPS) and work instructions to achieve specified weld quality that meets criteria of post weld testing requirements. Maintain welding equipment, tools, and supplies in safe working order. Must be able to function effectively in a team-based environment, maintain a clean work are, maintain HSE compliance standards including proper utilization of all required PPE and adherence to related safety procedures.
JOB QUALIFICATIONS:
• Specialized welding training and/or 8+ years of related welding experience with a demonstrated skill proficiency at an advanced level, or an equivalent combination of training, experience, and skill proficiency. • Must be skilled in at least 3 of the following processes GMAW, FCAW, SMAW, GTAW and saw. • Must pass a 3g plate test in Mig/Fluxcore. • Must pass a 6g all Tig with a 1/2“ schedule 160 pipe. • Must consistently demonstrate code quality. Must be proficient in the following codes: API, B313, UW51, UW52, B1.1, STS, etc. • Must possess a mechanical aptitude, and be able use various measuring equipment. • Must be able to use positioners and pinwheels. • Must have demonstrated experience with set up, layout, blueprint reading, weld symbols, and joint configuration. • Must be familiar with mismatch tolerances. • Experience in the petrochemical industry preferred. • Must be skilled fitter with verifiable experience • Must pass a written fitter test • Must maintain welding equipment, tools, and supplies in a safe working order • Must be able to perform duties with little or no supervision
MENTAL REQUIREMENTS:
Must be able to read and understand blueprints/engineering specifications. Must possess sufficient interpersonal skill to interact effectively with persons inside and outside the Company to accomplish job tasks. Must have the ability to perform mathematical calculations related to job requirements including trigonometry and geometry. Must be able to work under stress and meet deadlines. Must be able to maintain and process job-related paperwork effectively. Must be able to handle multiple priorities.
PHYSICAL REQUIREMENTS:
Must be able to go up and down stairs, perform unaccompanied travel, and communicate effectively. Must have physical stamina to stand 8 or more hours per day and operate welding equipment. Must be able to rig and operate equipment to move heavy loads. Must be able to lift/maneuver 70lbs unassisted. Position requires standing or walking all the workday. Frequently involves stooping and kneeling. Must possess sufficient visual acuity and depth perception to accomplish job tasks. Must possess manual dexterity such as reaching, handling, fingering, and touching to effectively handle material and operate welding equipment. Must be able to tolerate shop environment and exposures associated with welding and industrial equipment manufacturing and apply appropriate safety equipment when required. Must be able to work overtime as required. Must not present a risk of injury to self or others while engaged in Company duties.
Benefits:
This is a temp to hire position. During the time you are on Key Personnel’s payroll, you will have access to Key’s awesome benefits package which includes a medical plan, PTO and more. Apply today!
Our office is located at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government issued identification that prove identity and eligibility to work in the U.S. between the hours of 8am to 3pm, Monday through Friday.
Key Personnel is an Equal Opportunity Employer
Safety Sensitive